超濾器英語怎麼說及英文翻譯

㈠ 請幫忙翻譯成英文

4, cathode electrophoresis system
The system consists of electrophoretic main channel, the Deputy groove, loop mixing system, paint system, rectifier power supply, standby power, a very fluid circulation system, water chiller, cooling tower, electrophoresis paint transfer tank, paint liquid temperature control device, ultrafiltration equipment, water equipment, exhaust systems and electronic control systems and other components.
1, electrophoresis coating tunnel
a, electrophoresis coating line with the tunnel structure, electrophoresis coating line after the washing by the electrophoresis chamber and two-part segment. Chamber body is made of carbon steel materials, after the washing tunnel made of stainless steel, welding seam closed with a continuous process, does not allow drip phenomenon. With both ends of the electrophoresis tank maintenance platform.
b, section of the station ends with retaining plate spray, with water dripping between the adjacent station segment, the bottom paragraph was dripping "mountain-type" type, easy to automatically back to spray liquid tank.
c, in the electrophoresis section and with drainage devices.
d, E body parts are sealed by continuous welding, does not allow drip.
2, process tank
a, electrophoresis tank with main and groove structure, the main channel with Vice-slot outlet, the volume-based deputy slot 10% of tank volume, tank material used δ6 carbon steel plate, slot coating δ8-10mm glass wall steel anti-corrosion materials capability of 20,000 volts DC voltage (any point not less than 12,000 volts), the main circulating pump electrophoresis corrosion pump, spare one. Electrophoresis tank connected between the main and auxiliary tank pipe, electrophoresis tank based temperature control system, temperature control accuracy of ± 2 ℃.
b, electrophoresis tank and rinse tank after the end of the bottom of the concave groove located for easy discharge and cleaning.
c, electrophoresis tank at the bottom of all main and installation of cycle tubes and Venturi mixing nozzle, improve circulation within the ability of electrophoretic paint to ensure the electrophoresis tank cycles per hour, not less than four times the bottom of the flow rate of 0.4m / s, the surface flow rate of 0.2 m / s.
d, electrophoresis tank side wall and bottom of the fixed anode tube with insulation and nozzle devices.
e, electrophoresis tank with a good grounding.
f, after the rinse tank are all main and auxiliary tank structure, are equipped with loop mixing device does not allow the bubble after the rinse tank overflow.
g, electrophoresis tank with 800mm wide on both sides of the maintenance channel, sufficient lighting.
3 spray device
a, mainly by the spray pump, spray pipes, valves, pressure gauges, nozzles and other components.
b, spray pipe designed with spray nozzle arranged in the pressure tube from top to bottom balance.
c, nozzle with universal ball head quick change polypropylene nozzles, UF washing by atomizing nozzle.
d, UF washing process uses reverse washing method, the same as Bath sink installed connecting pipe, the following process to facilitate the bath overflow forward working procere.
e, set up the tunnel at the top of hanging chain protection.
4, auxiliary equipment
a, anode system
From the anode, the anode liquid storage tanks, pumps and piping and instrumentation composed of infusion. Anode structure, a tubular anode area ratio of anode: cathode = (6-4): 1. Anode system with flow meter, the anode fluid through the pump cycle, control the electrical conctivity of the anode. Played when the anode process fluid conctivity value, the water will automatically open the water valve, liquid storage tank into the anode. Pump and liquid tank anode material using SUS (or PVC) material, infusion tube by use SUS (or PVC), electrode using SUS.
b, ultrafiltration system
Super filter by the volume, ultra filter circulation pump (pump with corrosion) reserve a pump, ultra-filtrate storage tank, tank and pump cleaning ultrafiltrate, ultrafiltrate infusion pumps, piping pressure gauge, flow meter, bag filter etc.. Ultrafilter permeable ability 1.0t / h (only cleaning).
c, feeding systems
Using one-component mixing system. The system consists of mixing tank (stainless steel), motor, cycloidal recer, mixing pumps, filters, infusion pumps and other components.

d, rectifier
Rectifier output voltage is 0-250V adjustable, 0-250A output current is adjustable.
e, water system
By the reverse osmosis tube, pump, piping, raw water storage tank and pumps, water tanks and pumps, dosing devices, pressure gauges, conctivity meter etc.. Water supply capacity of 1.5T / h (with a combination of processes).
f, water sealing system
Water sealing system for sealing horizontal pumps. UF water seal fluid liquid, seal pressure 0.35MPa.
g, refrigeration system
By the refrigeration unit, cooling towers, chilled water pumps and piping pressure gauge, thermometer, insulation materials and other components. Electrophoresis lacquer paint mixing process or will continue to accumulate heat, so it is necessary to install the circulatory system in the electrophoretic paint plate heat exchanger, resulting from the freezer chilled water supply heat exchanger, automatic lowering the temperature of paint. Freezer power about 10 million kilocalories for environmentally friendly refrigeration units.

㈡ 時間緊迫，哪位朋友能幫忙翻譯一下一些設備的英文名稱懸賞300分！謝謝！

這是一套骨膠處理系統的主要設備清單，量很大。請按照「懸賞300分！謝謝！」給分。

1骨料迴流螺旋 aggregate backflow screw
2無軸螺旋輸送機 shaftless screw conveyor
3三螺旋錐形混合機 triple spiral conical mixer
4斗提機 bucket elevator
5擠膠機搖擺頭 rubber extruder swinging head
6減速機 speed recer
7奈莫泵 NEMO pump
8耐腐蝕泵 corrosion resistance pump
9排污泵 sewage pump
10自吸泵 self suction pump
11屏蔽泵 shielded pump
12潛水泵 submersible pump
13管道泵 pipeline pump
14泥漿泵 slurry pump
15骨素泵 ossein pump
16助濾泵 drainage filter pump
17預塗泵 pre-coat pump
18加壓泵 pump(booster pump)
19螺旋式濃漿泵 spiral thick slurry pump
20溶氣水泵 air-in-water pump (air associated water pump)
21計量泵 metering pump
22風冷式壓縮機 air cooled compressor
23水冷式壓縮機 water cooled compressor
24發電機 generator
25汽輪發電機 turbo generator
26柴油發電機 diesel generator
27預破碎機 pre-crusher
28棉餅破碎機 cotton cake crusher
29骨碎研磨機 bone grinding machine
30磨粉機 grinder
31隔柵機 grid machine
32篩粉分離器sieve separator
33重力分離機 gravity separator
34旋轉篩 rotating screen
35紙板過濾機 paper filtration
36圓盤過濾機disk filter
37UF超濾機UF ultrafilter
38棉餅過濾機 cotton cake filter
39脫酸機 acid extractor
40圓盤撈渣機 disc slag-dredger
41麻石除塵器 Mashi st remover
42廢水處理系統 waste water treatment system
43油水分離機 oil-water separator
44真空吸濾機vacuum suction filter
45碳濾水柱 carbone water filter column
46攪拌槽 agitating tank
47潛水攪拌器 submerged agitator
48三螺旋錐形混合器 triple spiral conical mixer
49壓棉機 cotton presser
50空氣加熱器 air heater
51空氣冷卻器 air cooler
52再生降溫熱交換器 regenerative desuperheater heat exchanger
53蒸煮水簾系統boiling (digesting) wet curtain system
54蒸汽減溫器 steam desuperheater
55氨製冷系統 ammonia refrigeration system
56乙二醇系統 glycol system
57蒸汽製冷機steam refrigeration machine
58雙頭螺旋蒸發器 double spiral evaporator
59空氣乾燥機 air dryer
60冷干機 refrigeration dryer
61冷凍式乾燥機 refrigerant air drier
62蒸汽鍋爐 steam boiler
63重油罐 heavy oil tank
64酸鹼儲罐 acid-base storage tank
65儲氣罐 air storage tank
66中和池 neutralization tank
67浸灰池 liming pool
68骨倉 bone silo
69浸酸桶 pickling barrel
70PLC控制器 PLC controller
71電動執行機構 electric actuator
72軟啟動器 soft starter
73電容補償櫃 capacitor compensation cabinet
74地磅測量 loadometer (weight bridge) measure
75節流閥 throttle (choke) valve
76旋塞閥 plug valve
77調節閥 control (adjusting) valve
78減壓閥 pressure recing valve
79柱塞閥 plunger valve
80紫外線殺菌器 ultraviolet sterilizer

㈢ 英語翻譯

These distillation steps are carefully designed for maximum efficiency with utmost care exercised in critical parts of the equipment to ensure safe, smooth and continuous operation with particular regards to polymer fouling. Optimized amounts of acrylonitrile stabilizers are used throughout all recovery and purification steps. To meet the usual customer requirements, final proct acrylonitrile is stabilized with hudroquinone monomethyl ether.
這些蒸餾步驟經過了仔細設計以達到最大的效率，這些設計在設備的關鍵部件上加以了極度的小心，以確保安全、順利和連續的工作，其中特別關注於聚合物的結垢。丙烯腈穩定劑的最佳數量在所有回收和純化步驟中從頭到尾都予以採用。為了滿足通常用戶的要求，最終產物丙烯晴用氫醌單甲醚進行穩定化。
Waste treatment and disposal
廢物處理和處置
Unavoidably, a certain amount of waste material is proced .Aqueous liquids are the largest problem both in quantity and composition. The quantity is fixed by the water proced in the reaction and the process purges which are minimized by complete recycling. Composition is mostly nitriles and other nitrogen compounds but the ammonium sulfate from the mother liquor of the crystallization step must be considered. For the most economical disposal of these wastes, both chemical and biological treatment is used. 一定數量的廢料不可避免地會產生。含水液體不管是數量上還是組分上都是最大的問題。數量是固定的，它源自於反應和過程清除產生的水，它們通過完整的循環而最小化。組分大多是腈和其他氮化物，但是來自於結晶化步驟母液的硫化銨必須予以考慮。關於這些廢料最經濟的處置，化學的和生物的處理方法都可採用。
Organic liquids-mostly cyanohydrins and acetonitrile-are easily and completely burned. 有機液體（多數是氰醇和乙腈）很容易完全燃燒。The only solid wastes are catalysts fines which are scrubbed by the ammonium sulfate solution and these are easily settled and filtered or these are easily settled and filtered or centrifuged. 唯一的固體廢料是催化劑細粒，它們用硫化銨溶液擦洗，它們很容易沉澱和過濾，或者離心分離。The high silica content of the metal components of this solid waste. But a treatment has been developed to recover the valuable metal components , so that practically only silica remains to be disposed of. 這種固體廢物的金屬成分中有高的二氧化硅含量。但是，已開發出一種處理方法來回收有價值的金屬成分，因此實際上，只有二氧化硅還需要加以處置。
Gaseous wastes consist of off-gases from the water absorber, and their resial content of nitriles-acrylonitriles and hydrogen cyanide-is less than 10 ppm e to carefully design and operation of the absorber. These are discharged to the atmosphere through a stack of some heat has been considered by burning these off-gases in a boiler with conventional fuel , but because of the very low propylene content , this becomes a matter of economical evaluation case by case.
氣體廢物由來自吸水劑（器）的廢氣構成，它們殘留的腈－丙烯腈和氰化氫的含量，由於仔細的設計和吸收劑（器）的工作而不到10 ppm。廢氣通過煙囪排放到大氣中，也已考慮在採用常規燃料的鍋爐中燃燒這些廢氣獲得一些熱量，但是因為丙烯的含量很少，所以成為了一件要根據情況考慮的經濟評估問題。

㈣ 碰焊機,油壓拉伸機,壓焊縫機,的英文怎麼寫

1. butt-welder 碰焊機
2. oil pressure drawframe 油壓拉伸機
3. pressure weld seamer 壓焊縫機