鍋爐型式英語怎麼說及英文翻譯

① 請專業人士幫忙翻譯一下英文，下午就要，在線等

鍋爐工程安裝 Boiler installation works
高壓發泡機 High-pressure foam machines
鍋爐及輔機 Boilers and auxiliary equipment
數控折彎機 NC bending machines
貨梯 Cargo Ladder
物流車及貨架 Logistics cars and shelves
木工除塵機 Woodworking st
購試驗設備 Purchase test equipment
液壓板料折彎機 Hydraulic sheet metal bending machine
焊機 Welder
沖壓擺式剪板機 Tilting cutting plate machine stamping
雙螺桿空開壓機 A twin-screw air compressor

② 鍋爐發展史的英文

Boilers is the use of fuel or other energy, geothermal energy, heating the water to become hot water or steam machinery and equipment. Boilers and furnaces, including two major pot, pot is the original meaning refers to the fire on the water heating container, fuel burning furnace is the place.
Generated in the boiler water or steam can be directly provided for by proction and living needs of the heat, and steam power plant can be converted to mechanical energy, or mechanical energy through the generators will be converted to electrical energy. Boilers to provide hot water as hot water boilers, mainly for living, instrial proction is also a small number of applications. Boiler for steam to be generated as the steam boiler, steam generator, also known, often referred to as the boiler, steam power plant is an important component of the power plant are used, ships, locomotives and instrial and mining enterprises.

Under high temperature and high pressure boilers, the importance of security issues. Even the small boiler, in the event of an explosion, the consequences are very serious. Therefore, the material on the boiler selection, design and calculation, manufacture and testing have formulated strict laws and regulations.

Boilers

The development of boilers and furnaces at two aspects of pot.

Half of the 18th century, the steam engine used in the British coal mines, including the Watt steam engine, including the initial stage, the use of steam pressure equal to atmospheric pressure. The second half of the 18th century to switch to higher than atmospheric pressure steam. The 19th century, commonly used steam pressure to about 0.8 MPa. To adapt, the first steam boiler is a water of the large-diameter vertical cylindrical shell pot, then switch to horizontal pot shell, shell in the pan in the bottom of brick furnace burner.

Growing in volume as the boiler, in order to increase the heating surface in the pot to install fire extinguishers in the shell, the front burner in the fire extinguishers, smoke from the fire extinguisher from the back through the row of brick to the chimney flue and pot shell external heating, boiler as the fire extinguishers. Fitted only the beginning of a fire extinguisher, fire extinguishers as a single boiler or boiler Connie Hsu, and later added two fire extinguishers, fire extinguishers as the double boiler or boiler Lancashire.

Around 1830, the availability of high-quality steel proction and expanding technology of fire-tube boilers there. A number of fire-tube shell in a pot, which constitute the main heating surface of boiler, fire (gas) flow in the tube. The water in the pot line shell fitted with as many as possible of the fire-tube, known as the outside horizontal tube boilers burning temper. Its low metal consumption, but requires a lot of masonry.

The mid-19th century, there have been boiler pipes. Boiler heating surface is a pot of water mains outside the shell, replacing the shell itself and the pot pot shell fire extinguishers, fire-tube. Boiler steam pressure to heat the area and the increase in shell diameter pot is no longer subject to the restrictions it will help to raise the boiler pressure and steam evaporation. This boiler pot cylindrical shell was renamed as the drum, or drum. Water tube boiler early just straight pipes, straight pipes and the pressure of the boiler capacity is limited.

Early twentieth century, steam began to develop, it requires the parameters with a high capacity and steam boilers. Straight pipes can not meet the requirements of the boiler. With the manufacturing process and water treatment technology, a water-tube boiler bends. Is the beginning of a multi-drum type. With the water wall, superheater and economizer applications, as well as the internal drum of gasoline and water to improve the separation of components, decreasing the number of drum, not only to save the metal, and concive to raising the boiler pressure, temperature, capacity and efficiency .

Previous boiler fire extinguishers, fire-tube boilers and water tube boilers are natural circulation boilers, water vapor on the rise, decline because of the heat pipe is different, and the density difference caused by a natural flow. In the development of the natural cycle of the boiler at the same time, applications from the beginning of the 30's once-through boiler, 40 ring the beginning of the application of assisted circulation boiler.

Also known as assisted circulation boiler forced circulation boiler, it is in the natural circulation boiler developed on the basis of. Vertical pipe in the installation of circulating pump system to enhance the evaporation of water heating surface. There is no once-through boiler drum, water supply to pump into the economizer, the water wall and superheater heating surface, such as evaporation into superheated steam to the turbine, the various parts of the flow resistance to the pump by to overcome.

After World War II, these two types of boiler developed rapidly, because the requirements of generating units and large-capacity high temperature and high pressure. The development of both boiler is designed to rece or do not drum, small diameter tubes can be used for heating surface can be arranged relatively freely heating surface. With the automatic control and water treatment technology, which is graally taking shape. In the supercritical pressure, once-through boiler is only used in a boiler, 70's single largest capacity of the pressure of 27 MPa with 1300 MW units. Later, the development of assisted circulation by the boiler and once-through boiler compound boiler from the combined cycle.

In the development process of the boiler, fuel type and combustion equipment for the furnace have a great impact. Therefore, not only to adapt to the development of a variety of furnace combustion characteristics of different types of fuel, but also improve the combustion efficiency to rece energy consumption. In addition, the furnace and combustion equipment also requires improving the boiler flue gas to minimize pollutants (sulfur oxides and nitrogen oxides)

The early adoption of a fixed shell boiler grate, multi-fuel with high-quality coal and firewood, coal and slag removal are by hand. Straight pipes after the boiler began to use mechanized grate, grate chain which has been widely used. Under grate air never subparagraph "EC warehouse style" development component supply segment.

Early furnace low, low combustion efficiency. Later it was recognized that the structure of the furnace volume and the role of the combustion, the furnace-made high, and the use of furnace arch and secondary air, resulting in improved combustion efficiency.

Power generating units over 6 MW, the layer above the grate burner size too large, the structure of complex and difficult layout, so the use of Room 20 ring the beginning of combustion furnaces, room heaters burning coal and oil combustion. Ground into a pulverized coal from Coal burner later injected into the combustion furnace, the capacity of generating units burning equipment was no longer subject to restrictions. Since the beginning of World War II, almost all of the use of power plant boiler furnace combustion chamber.

The early years of the pulverized coal to create a U-shaped flame. Pulverized coal burner air exhaled in the first drop in the furnace, and then turn increased. Later, a pre-arrangement of the cyclone wall burner, the flame in the furnace to form L-shaped torch. With the increased capacity of the boiler, burner swirl number have begun to increase, can be arranged in both sides of the wall, the former wall can also be arranged. 1930 arranged around a corner in the furnace and most of the way into tangentially fired burner DC.

After World War II, the oil price, widely used in many countries, oil-fired boiler to start. Oil-fired boiler to increase the degree of automation easy. 70s after the oil price increases, many countries have once again shifted the use of coal resources. At this time the capacity of power plant boiler is also increasing demands combustion equipment can not only burn completely and fire stability, reliable operation, low-load performance, and also the need to rece pollutants in smoke.

In the coal (especially lignite fired) power plant boiler used in the staged combustion or low temperature combustion technology, that is, the delay coal mixed with air or mixed gas in the air so as to slow down the combustion or burner to curb spread open temperature, not only inhibited the generation of nitrogen oxides, but also to rece slagging. Boiling temperature combustion is a combustion, combustible with the exception of a very high ash solid fuel, but also mixing in the boiling bed of limestone for desulfurization.

Boiler work

Boiler, said boiler performance parameters are the main indicators, including the capacity of the boiler, steam pressure, steam temperature, water temperature.

Rated boiler capacity available for evaporation or maximum evaporation expressed. Evaporation is rated the required outlet pressure, temperature and efficiency, the unit time for the steam proction capacity. Evaporation is the largest for the export of the required pressure, temperature, the unit time to the maximum amount of continuous proction of steam.

Parameters, including steam boiler steam pressure and temperature, usually refers to superheater, reheater exit of superheated steam pressure and temperature if there is no overheating and Reheater, meaning that the exit of the boiler steam pressure and temperature. Economizer water temperature is the temperature of the water, no economizer inlet temperature when the drum means.

Boilers can be classified in different ways. Boilers can be classified by end-use of instrial boilers, utility boilers, marine boilers and locomotive boilers, etc.; by boiler outlet pressure can be divided into low, medium pressure, high pressure, high pressure, sub-critical pressure, supercritical pressure boiler; boiler by water and flue gas flow path of the fire extinguishers can be divided into the boiler, fire tube boilers and water tube boiler, in which fire extinguishers and fire-tube boiler as the boiler and shell boiler; by a revolving basis, can be divided into the natural circulation boiler, auxiliary boiler cycle (that is, mandatory cycle of the boiler), once-through boiler and combined cycle boilers; by combustion, the boiler room is divided into burning stoves, heaters and boiling layer burning heaters.

In the water system, water heated in the heater to a certain temperature, the water supply pipe into the economizer, and further into the drum after heating, and boiler water mixture downstream along the vertical pipe to the water wall header imports. Water absorption in the water-wall tube furnace to form a soft mixture of radiant heat by the arrival of drum riser, the separation device by soft water, gas separation. Separated from the saturated steam flow from the upper drum to the superheater, to continue to endothermic become superheated steam of 450 ℃, and then to the steam turbine.

Burning and smoke in the wind systems, air blower into the air preheater heating to a certain temperature. In the mill was ground into a certain fineness of pulverized coal from a part of the air preheater by the hot air to carry injected into the furnace burner. Out of the coal burner and air mixture in the furnace with the rest of the hot air combustion, a large number of heat release. Thermal post-combustion flue gas flowing through the furnace order, condensate resie control, superheater, economizer and air preheater, and then after a st removal device, remove the fly ash, the last by the suction fan to the chimney into the atmosphere row.

Boiler structure

The overall structure of the boiler, including boiler and auxiliary equipment of two major parts. Boiler in the furnace, drum, burner, wall superheater, economizer, air preheater, furnace wall structure and composition of major components of the core of the proction of steam, known as the boiler. Boiler in the two most important components are the furnace and the drum.

Also known as furnace combustion chamber, fuel combustion for space. Will be on solid fuel on the grate for the fire-bed combustion furnace known as the layer burning stoves, also known as the fire-bed furnace; will be liquid, gas or ground into a powder of the solid fuel, is injected into the combustion chamber of the furnace of fire known as the Room burning furnace, furnace room, also known as the fire; air will hold its coal combustion was boiling and low-grade fuel for combustion furnace known as the boiling furnace, also known as the fluidized bed furnace; the use of coal particles of air flow so that high-speed rotation, and strongly burning furnace of cylindrical furnace known as the Tornado.

Furnace cross-section of generally square or rectangular. Fuel combustion in the furnace flame and high temperature flue gas to form, so the stove around the furnace wall by the high temperature materials and thermal insulation materials. In the furnace wall on the inner surface of the regular laying of water-wall tube, it will not burn the protection of furnace wall and the flame and high temperature flue gas to absorb the large number of radiant heat.

Furnace designed to take full account of the characteristics of the use of fuel. Each boiler shall be fueled with the original design as much as possible fuel. Burning characteristics of the larger difference in fuel economy when the boiler operation and reliability can be reced.

Drum is a natural cycle and multiple forced circulation boiler, the economizer to accept the water supply, circuit connection to the steam superheater cylinder delivery device described. Traditional drum made from high quality thick steel plate is a boiler in one of the most important components.

Drum's main function is water, soft drinks to the separation of pot ruled out running in the saline water and mud resie, to avoid high concentrations of salt and impurities in the boiler water with the steam entering the superheater and the steam turbine in.

Device includes an internal drum separator and steam cleaning equipment, water distribution pipes, sewage processing equipment such as drugs. Separator device which is to come from the wall and the saturated steam from the water and to minimize the steam in small water droplets carried. , The low-pressure boilers used as a baffle and baffle gap separating coarse components; over medium-pressure boiler in addition to a variety of widely used types of cyclone for the separation of rough, but also with 100 windows, steel mesh or steam, etc. are carried out further separated. Drum water level is also equipped with a table, a safety valve, such as monitoring and protection facilities.

To assess performance and to improve the design, often have to go through the boiler heat balance test. Directly from the efficient use of energy to calculate the thermal efficiency of boiler is a balanced approach is called, from a variety of heat loss to the efficiency of counter-balance method is called counter-balance. Consider the practical benefits of the boiler room not only depends on the thermal efficiency of boilers, but also taking into account the auxiliary boiler and the amount of energy.

Unit mass or unit volume of fuel combustion, the chemical reaction is calculated according to the theory of air known as air traffic demand. In order to make the fuel in the furnace, there are more opportunities for contact with oxygen combustion, the actual volume of air into the furnace is greater than the total theoretical air. Although more air into the incomplete combustion can rece heat loss, but the smoke will increase heat loss, but also exacerbate corrosion of sulfur oxides and nitrogen oxides generated. Therefore efforts should be made to improve the combustion technology for small to minimize the excess air ratio so that the combustion chamber completely.

Boiler flue gas contained st (including fly ash and carbon black), oxides of sulfur and nitrogen pollution in the atmosphere are the material, without purification of their emission targets can be achieved several times indicators of environmental protection provisions of the several dozen times. Emissions control measures of these substances have a pre-combustion, improved combustion technology, desting, desulfurization and denitrification, such as. High chimney with only the area around the chimney to rece atmospheric concentrations of pollutants.

Flue gas st removal of the force used by gravity, centrifugal force, inertia force of adhesion, as well as sound waves, static electricity and so on. Generally used for coarse particle sedimentation and inertial force of gravity separation, at a high capacity centrifugal separation under the regular use of electrostatic precipitators and bag st filter with high collection efficiency. And the Sultan's wet - water film st collector in the droplet adhesion film can fly, can absorb a very high collection efficiency of gaseous pollutants.

The twentieth century since the 50's, people strive to develop comprehensive utilization of ash, Wei of harm. Ash manufacturers such as cement, brick and concrete aggregate and other construction materials. 70s extract from fly ash from Cenosphere, such as a fire-resistant insulation materials.

Boiler future development will further enhance the thermal efficiency of boilers and power plants; boilers and power plants to rece the unit cost of power equipment; to improve the operation of boiler unit level of flexibility and automation; to develop more varieties to suit different boiler fuel; raise the boiler unit and its the operation of auxiliary equipment reliability; to rece environmental pollution.

③ 鼓風爐和高爐是一樣的嗎為什麼英文翻譯都是Blast furnace

豎爐的一種。由爐頂、爐身和爐缸或本床組成。煉鐵鼓風爐通稱高爐；鼓風爐則一般指有色金屬的熔煉豎爐。
一. 鼓風爐
blast furnace | air furnace 詞博科技英語次科技詞彙[38501-38600] | blast cupola furnace 鼓風爐; 化鐵爐 .詞博科技英語次科技詞彙[49401-49500]|
例句與用法
1.鉛團在鼓風爐中被溶解。雜質就能被掠去了。
The lead paste is then smelted in a blast furnace. Impurities can be skimmed off.
2.從均勻送風爐出發,評述了諸多均勻送風鼓風爐,如:無焦沖天爐、轉爐、懸浮爐、煤炭氣化爐、旋風爐、余熱鍋爐、沸騰爐等等,以期功能強化、能源節約和污染減輕,從而奠定爐型工程學基礎。
In order to strengthen the function,save energy and lighten pollustion,this paper reviews many balanced-blast furnaces,example for cokeless cupola,converter,suspended furnace,coal-gasifier,cyclone furnace,remaining heat boiler,fluidezed bed etc.,started from balanced-blast cupola,therefore establishing the base of furnace type engineering science.

2. 正文
豎爐的一種。由爐頂、爐身和爐缸或本床組成。爐頂設有加料口和排煙口。爐身下部兩側各有向爐內鼓風的風口若干個，爐缸設有熔體排出口和放空口，本床只設一個排出口。
煉鐵鼓風爐通稱高爐；鼓風爐則一般指有色金屬的熔煉豎爐。
鼓風爐可用於銅、鎳、鈷等金屬的造鋶熔煉和鉛、鋅等金屬的還原熔煉，還可用於熔化雜銅和處理其他物料。鼓風爐的爐料一般為塊狀，燃料為焦炭。爐料分批從爐頂加入，形成料柱。空氣由下部風口鼓入，焦炭在風口區燃燒，形成高溫熔煉區；爐料在此激烈反應，不斷熔化。還原熔煉時，熔體在爐缸內澄清，分別放出金屬和爐渣，造鋶熔煉時，熔體經本床流入前床，澄清分離出冰銅和爐渣。熱煙氣穿過爐料上升至爐頂排出過程中，使爐料預熱（熔煉混捏精礦時,還使精礦燒結）,並發生部分熔煉化學反應。所以鼓風爐的傳熱傳質條件好，熱效率高，單位面積日生產能力（即床能率）大。

鼓風爐爐身橫斷面多為長方形，小型爐一般為圓形或橢圓形。爐內的風口部位叫風口區，風口區橫斷面積為衡量爐子大小的尺度。長方形鼓風爐風口區的寬度一般為1～1.5米,長度3～10米。風口至料面的距離稱為料柱高度。爐頂料面上的溫度為爐頂溫度。鼓風爐熔煉的操作分高料柱（3.6～ 5.5米)冷爐頂(100～200℃)和低料柱（2.5～3.5米）熱爐頂(300～500℃)兩種。還原熔煉多用高料柱，造鋶熔煉多用低料柱。鼓風爐的燃料為焦炭。還原熔煉時，焦炭兼作還原劑，焦率較高，如煉鉛鼓風爐焦率約10～13％；造鋶熔煉，焦率較低，煉銅鼓風爐焦率約 8～10％。鼓風爐風壓與料柱高度和爐料塊度有關，高料柱操作,一般為80～150毫米汞柱(表壓)，低料柱操作，一般為50～80毫米汞柱（表壓）。鼓風爐風口區為熔煉區，溫度最高,煉鉛爐約為1250℃,煉銅爐約為1350℃。鼓風爐的床能率以風口區單位面積計，煉鉛爐一般為50～70噸／（米2·日）,熔煉銅精礦的鼓風爐一般為40～50噸／（米2·日）。
鼓風爐是傳統的冶金設備之一。19世紀末，爐身開始採用局部水冷裝置，後來發展成全水套爐身；現已發展為汽化冷卻，生產低壓蒸汽。

參考書目
趙天從主編：《重金屬冶金學》,冶金工業出版社,北京，1981。

二.高爐
blast furnace 環境資源與相關詞彙
. 近義詞或片語
high furnace 化學及化工專業英語詞彙(H) | shaft furnace 焊接專業關聯詞彙（鑄造2）(3) - 焊接術語| blastfurnace
1.高鋁質耐火泥漿用於高爐、熱風爐及其它工業爐砌築高鋁磚。
High aluminum refractory mortars widely used for aluminum brick masonry in blast furnaces ,hot air stoves coke ovens , reheating furnaces and other instry furnaces.

2.焦爐廠中生成的焦炭在高爐中還原鐵礦石（鐵的氧化物）成鐵。
As a simple overview, the blast furnace needs coke from the coke plant to rece the iron ore (iron oxide) to iron.
來源：www.labguide.cn

橫斷面為圓形的煉鐵豎爐，用鋼板作爐殼，裡面砌耐火磚內襯。高爐本體自上而下分為爐喉、爐身、爐腰、爐腹、爐缸五部分。爐喉之上設置裝料設備（見高爐供料和裝料系統）。爐缸上部沿周均勻設風口，熱風通過熱風圍管、支管和彎頭、直吹管由風口鼓入爐內（見高爐鼓風系統）。風口平面之下有出渣口，渣口平面之下有出鐵口。

高爐內型 高爐內型輪廓要根據原料、燃料、高爐容積和操作等條件設計。設計爐型時首先確定爐缸直徑及單位爐缸面積每日燃燒焦炭的數量。中國設計的經驗式是,式內d為爐缸直徑（米）；i為冶煉強度〔噸／（米3·日）〕，取1.0～1.2；V為高爐容積(米3)；J為燃燒強度〔噸焦炭／（米2·日）〕,取24～28.8。然後按各部分尺寸比例和爐身角 (85°左右)計算。設計的內型要與生產中的高爐內型對比，參考容積近似的其他高爐的尺寸進行修改。

高爐爐體結構 按爐體外部結構、高爐基礎、高爐內襯和冷卻設備分述如下：
爐體外部結構 主要有自立式、爐缸支柱式、框架支柱式、框架自立式等四種。它們的差別在於支承爐頂、上部爐殼和磚襯負荷的地方不同。早期小高爐多是自立式，大型高爐大多採用框架自立式。現代大型高爐鼓風壓力高,爐體外殼鋼板加厚,殼內噴塗耐火材料，防止熱應力和晶間腐蝕引起開裂和變形。風口平台有較寬敞的操作空間；取消渣口，改用矮式泥炮；風口平台連成一片，以便叉車和換風口機行走。

高爐基礎 高爐基礎所承受的負荷按平均每立方米爐容約5～6噸考慮，用鋼筋混凝土基礎建在岩石、筒式樁或鋼管樁（內灌水泥）上。海濱建廠的大型高爐基礎採用長幾十米的鋼管樁作底座。
高爐內襯 高爐爐殼內部砌有一層厚345～1150毫米的耐火磚，以減少爐殼散熱量，磚中設置冷卻設備防止爐殼變形。高爐各部分磚襯損壞機理不同，為了防止局部磚襯先損壞而縮短高爐壽命，必須根據損壞、冷卻和高爐操作等因素，選用不同的耐火磚襯。爐缸、爐底傳統使用高級和超高級粘土磚。爐底使用碳磚有三種型式：全部為碳磚；爐底四周和上部為碳磚，下部為粘土磚或高鋁磚；爐底四周和下部為碳磚，上部為粘土磚或高鋁磚。後兩種又稱為綜合爐底。爐身上部和爐喉磚襯要求具有抗磨性和熱穩定性的材料，以粘土磚為宜。爐腹磚襯被侵蝕後靠「渣皮」維持生產。
冷卻設備 主要有冷卻水箱和冷卻壁兩種。因高爐各部分熱負荷而異。爐底四周和爐缸使用碳磚時採用光面冷卻壁。爐底之下可用空氣、水或油冷卻。爐腹使用碳磚時可從外部向爐殼噴水冷卻，使用其他磚襯時，用冷卻水箱或鑲磚冷卻壁。爐腰和爐身下部多採用傳統的銅冷卻水箱。爐身上部可採用各種形式的冷卻設備，一般用鑄鐵或鋼板焊接的冷卻水箱。爐喉一般不冷卻。冷卻介質過去使用工業水，現在改用軟水和純水。直流或露天循環供水系統也已被強制循環供水系統所代替，後者優點是熱交換好、無沉澱、消耗水量少等。

④ 幫我翻譯一下SOFA的意思（動力英語），下面是全句，能全翻著更好。在網上自動翻譯還想要懸賞的勿擾！

SOFA 是 Separated Over-Fire Air 的縮寫，中文稱為【分離燃盡風】；這是降低發電廠燒鍋爐時散發氧化氮的一種技術。

⑤ 英語Main Course怎麼翻譯

英語Main Course翻譯是主菜。

重點單詞：main。

一、發音

英 [meɪn]；美 [meɪn]

二、中文翻譯

• adj.主要的；最重要的

• n.總管，輸電干線；水源；煤氣源；電源

三、詞形變化

復數：mains

四、短語搭配

main boiler 主鍋爐

main body 主體

main crop 主要作物

五、雙語例句

1.What are your main learning goals?

你的學習主要目標是什麼？

2.They have been wired into the main system now.

他們現在已經與輸電干線接通了。

⑥ 火力全開的英文怎麼說

火力全開的英文是：open fire

短語

短語

open-fire kettle火管式鍋爐 ; 直接火加熱蒸煮鍋

Open n fire開火

open your fire開火 ; 開戰

Open the fire開火

例句

1、On Monday unconfirmed reports surfaced of Syrian military units clashing with each other in Deraa when soldiers refused to open fire.

本周一，據一個尚未得到證實的報道稱，因有士兵拒絕開火，敘利亞軍隊內部發生了沖突。

2、However, the German BCs soon have more to worry about. I have crossed the enemy T and my BBs open fire on the approaching German line at extreme range.

不過，德國戰巡們很快有更多的擔心，我已經越過了敵人的T字頭，我的戰列艦開始開火並打擊德國戰巡線列的外圍艦船。

(6)鍋爐型式英語怎麼說及英文翻譯擴展閱讀

近義詞

1、set out

出發；開始；陳述；陳列

短語

needle set-out織針排列

set trim out on清空多餘的空格

set-out range啟程

system set-out系統布置

2、come up

走近；發生；開始；上升；發芽；被提出

短語

come-up 誘惑物 ; 縮小 ; 台灣川方 ; 上浮

come galloping up to 飛馳而去

come e up to 來到近旁

⑦ 求英語達人翻譯--酒店用品

KITCHEN AND BAKERY EQUIPMENT / 廚房及烘培設備
virtus 4 burner electric cooker with oven/四頭電爐連焗爐
instrial shawamar machine / 維圖斯商用沙威瑪機
instrial hamburger grill / 維圖斯商用漢堡烤架
instrial hot plate dispenser/ 商用熱板飲料鼎
virtus n marie electric / 維圖斯電雙層蒸鍋
virtus 4 burner gas with oven / 維圖斯四頭燃氣爐連焗爐
virtus boiling pan electric / 維圖斯電蒸煮鍋
virtus stock pot stove / 維圖斯煲仔爐
virtus electric deep fat fryer/ 維圖斯電油炸鍋
molar dish washer opt 130/ 美都樂130型帶傳送式洗碗機
instrial double bowl sink /商用雙槽洗滌槽
instrial work table /商用工作台
molar potatoe peeler /美都樂削皮機
instrial flood standing scale /商用立式磅秤
instrial blender T5 商用T5攪拌機
instrial chopping block / 商用砧板
virtus electric griddle 1/2 grooved 1/2 smooth/ rough
維圖斯電熱半平半坑 扒爐
virtus orange squeezer 維圖斯榨汁機
virtus display warmer pastry show rack 4 trays
維圖斯保溫型4層點心盤架
instrial microwave 商用微波爐
juice dispenser 3 bowls 11 litres--11升3連果汁鼎
instrial 2 tier service trolley 商用兩層送餐車
instrial platform trolley 商用平板車
brema ice cube machine 24kg /24千克brema冰塊機
molar ice cream machine 3 dispenser 美都樂3連冰淇淋鼎
insrial mince meat machine商用肉沫機
ght double door deep freezer ---ght雙門冷藏櫃
ght double glass door fridge -------ght雙玻璃門冰箱
refrigerated cabinet 700 litres--700升保鮮櫃
instrial wall cupboard--商用吊式碗櫥
popcorn machine --爆米花機
grinding machine--碾磨機
soup kettle--湯鍋
shelves rack--置物架
chaffing dishes 火鍋
stainless steel exhaust hood, electro 2 fan with light
不銹鋼電動帶燈兩扇抽油煙機
virtus rotor oven gas mixed convention
維圖斯燃氣轉爐帶烤箱
planetary mixer for bakery (40 and 20 kg)
麵包房用行星式攪拌機（40和20千克）
instrial bread slicer 商用麵包切片機
instrial pastry roller 商用蛋卷機
cobber washing machine electric heated庫伯電熱洗滌機
cobber tumble dryer machine electric heated庫伯電熱烘乾機
cobber flat worker ironer 5.9ft electric heated
庫伯 5.9英寸電熱平熨機
pony room service trolley 坡尼房間服務小推車
pony suit former 坡尼西服整形機
pony rectangular finishing board with boiler
坡尼方形燙台帶鍋爐
pony hot plate prsser(jackson) with boiler
坡尼熱板壓呢機帶鍋爐
bagging machine 裝袋機
cobber hydro extractor 庫伯脫水機
wet linen trolley (aluminum）濕亞麻織物推車（鋁質）
dry linen trolley (plastic) 干亞麻織物推車（塑料）

⑧ 鍋爐發電，焊接術語中，英文tube，ct和pipe翻譯成中文都是「管」，那它們的區別是什麼呢

tube，可以指化學上的試管，管子，管狀物，盛膏狀物體的管狀容器，還指地鐵，
ct指電視電纜的管道，通風管，手術上的人體內輸送淚液，胰液的導管，比如膽管，
不過你要是鍋爐方面，還是pipe合適，pipe指金屬或塑料管道，比如燃氣管就是gas pipe，，煙斗，煙筒，管樂器，這是我自己整理的，望對你有幫助，謝謝！