鹼洗英語怎麼說及英文單詞

⑴ 鹼洗用英語怎麼說

鹼洗
[詞典] [化] alkali wash; alkaline wash; caustic wash(ing);
[例句]介紹了纖維膜接觸器技術及其在順丁橡膠裝置鹼洗過程中的應用。
The fiber membrane contactor technology and its application in caustic washing of cis-1,4-polybutadiene rubber unit are introced.

⑵ 勞駕英語高手翻譯兩段話啊...謝謝啊!!! 翻得好就送分.強烈鄙視機器翻譯！！

The engine oil using is mineral engine oil , it is heavy petroleum quality like [principle] heat up be allotted a kind of proct distilling but as a result of relaxing the pressure.So-called waste engine oil , first foreign substance such as to point to engine oil have sneaked into moisture content , st in usage , being mingled with the metal powder that oil and work wear proce other;Two is organic acid , galotinous and pitch shape matter graally, having gone bad , coming into being point to engine oil. Waste engine oil method such as regenerating , being with settlement , distillation , acid-washing , alkali wash , fliteration eliminates foreign substance inside the engine oil.
[Handle] that (1) subsides waste oil is purchased quietly , makes foreign substance come down but parts for. Time decides settlement from oil quality and the oil temperature. The oil temperature is increasingly high , viscosity is increasingly small , foreign substance is the easier to come down , subside , the shorter for time.
(2) distillation puts the waste engine oil handling course subsiding after eliminating precipitate inside the distillation flask inner. Finish installing the distillation device , heat the atmospheric distillation being in progress. Distilling off in 180 ~C is a gasoline , 180 ~ 360 ~C's heating up are diesel oil mark , staying is engine oil.If the known number is useless do not have foreign substance such as gasoline , diesel oil within engine oil , can save away this single-step operation.
3) acid-washing put the engine oil after settlement , distillation inside the oil of vitriol heating in big one beakers, to 35 ~C, in volume about 6 ~ 8% stirring time adding Zhan engine oil slowly (add be over within 30 minutes).Sulphonating reaction happened in galotinous , pitch shape foreign substance etc. in oil of vitriol and waste engine oil at this time. For the foreign substance eliminating these sulphonating queens, delamination again, adding the effect starting account for 1% of 10% caustic soda solution engine oil volume , a flocculating agent , accelerating foreign substance.Purchases a period of time , appears right away to stratify obviously quietly,upper strata oil foreign substance such as assuming yellow green , not having the black pellet stirs 5 minutes after adding an alkali .

⑶ 活性鹼洗衣服怎樣

鹼倒是可以用來洗衣服；但是鹼用來洗衣服不好，會嚴重損傷衣服的纖維和顏色。
再看看別人怎麼說的。

⑷ 五金製品表面處理方式英文，請提供全面一點的，謝謝！ 比如抗氧化，洗白 ，鍍鎳，鹼洗，電鍍等！

http://www.efunda.com/processes/surface/surface.cfm
這是 一個網站 上面有比較詳細的介紹 你可以看看

另外還有一些資料，希望對你有幫助：
Surface Treatment Code Method and Application Surface Condition
No.1 This is a proct that has undergone annealing and pickling treatment after hot rolling. It is used in cold rolling materials, instrial tanks, and instrial chemical devices.

No.2D No. 2D is a non-glossy cold-rolled proct that has undergone annealing and pickling treatment after cold rolling. Used in petrochemical plants, automobile parts, building materials, and pipes.

No.2B No. 2B is the type that had skin-pass (temper-rolling) performed on No.2D. It has better gloss and surface flatness compared to No.2D. It is the standard surface class with improved mechanical properties. It is applicable for almost all uses.

No.3 No. 3 is polished with 100~120 mesh abrasive. It has a variety of uses including building exterior and interior, casings for various kinds of home appliances, and kitchen installations.

No.4 No. 4 is polished with 150~180 mesh abrasive. Compared to No.3, this proct has a finer abrasion condition. Its surface is an attractive silvery-white and is used for bathtubs, building exterior and interior,and food instry.

BA BA is bright and highly reflective surface proced by bright annealing after cold rolling. BA is used in home appliances, small-sized mirrors, kitchenware, building materials and others that require reflective properties.

HL HL is a type of surface with continuous striped pattern acquired by polishing the surface with No.4 abrasive. It is widely used for building exterior and interior. HL is also used in sashes and doors.

Dull Dull surface is matte finish proced by recing gloss from No.2B and creating roughness on the surface. It is widely used in building exterior and interior, roofing and elevators that require reced light reflection.

現在不銹鋼的發展，已使不銹鋼的耐蝕性、外觀、加工性、強度等特性遠遠超過其它材料，而且，不銹鋼的許多表面處理法，可以取得豐富多彩的顏色及形狀，這為不銹鋼的發展作出很大的貢獻。

不銹鋼製造過程中的表面處理法以及機械研磨表面處理法
表面 特徵 製造法概要 用途
NO.1 銀白色，無光澤 熱軋到規定厚度，再經退火和除鱗的一種粗糙、無光表面 不需要有表面光澤的用途
NO.2D 銀白色 冷軋後進行熱處理和酸洗，有時在毛面輥進行最終的一道輕軋的一種無光表面加工 2D產品用於對表面要求不嚴的用途，一般用材，深沖用材
NO.2B 光澤強於NO.2D NO.2D處理後，經過拋光輥進行最終一道輕度冷軋，以取得適當光澤。這是最常用的表面加工，該加工也可作為拋光的第一步。 一般用材
BA 光亮如鏡 無標准，但通常是光亮退火的表面加工，表面反射性很高。 建築材料，廚房用具
NO.3 粗研磨 將NO.2D和NO.2B材，用100~200#（單位）的砥粒研磨帶，進行研磨 建築材料，廚房用具
NO.4 中間研磨 將NO.2D和NO.2B材，用150~180#砥粒研磨帶進行研磨而獲得的拋光表面，這是通用的，有鏡面反射的帶有可見『晶粒』的光亮表面 同上
NO.240 細研磨 將NO.2D和NO.2B材，用240#砥粒研磨帶進行研削 廚房用具
NO.320 極細研磨 將NO.2D和NO.2B材，用320#砥粒研磨帶進行研削 同上
NO.400 光澤接近於BA
將NO.2B材，用400#拋光輪進行研削 一般用材，建築用材，廚房用具
HL 發紋研磨 適當粒子大小的研磨材料進行發紋研削（150~240#）其砥粒很多 樓房，建築用材
NO.7 接近於鏡面研磨 用600#回轉拋光輪進行研磨 美術用，裝飾用
NO.8 鏡面研磨 鏡子用拋光輪進行磨

⑸ 鹼洗塔產生的廢水可以循環使用么

鹼洗塔產生的廢水需酸中和後可以循環使用，當溶質過量會影響生產，也可採用多效蒸發器來製作純水冷卻後循壞使用。

⑹ 自己今天用鹼洗了黃金項鏈,會不會減少重量或對黃金有害啊

1、用鹼洗了黃金項鏈，不會減少重量也不會對黃金有害。
2、鹼是指有別於工業用鹼的純鹼（碳酸鈉）和小蘇打（碳酸氫鈉），小蘇打是由純鹼的溶液或結晶吸收二氧化碳之後的製成品。
3、黃金（Gold）是化學元素金（化學元素符號Au）的單質形式，是一種軟的，金黃色的，抗腐蝕的貴金屬。
4、項鏈（拼音：xiàngliàn；英文：necklace）是用金銀、珠寶等製成的掛在頸上的鏈條形狀的首飾。