塑料产品亮面翻译英语怎么讲

㈠ 塑料滑套用英语怎么说

塑料滑套
翻译结果：
Plastic sliding sleeve

㈡ 塑料英语谐音怎么说

你好!
塑料
plastic 英[ˈplæstɪk] 美[ˈplæstɪk]
n. 整形; 塑料制品; 〈口〉（使用）信用卡; 可塑体;
adj. 可塑的，塑性的，受回范的，柔软的; 造型答的，塑造的，给与形态的; 塑料[塑胶]的，塑料[塑胶]制的，合成树脂做的; 有形成力的，有创造力的;
[例句]A lot of the plastics that carmakers are using cannot be recycled.
汽车制造商使用的许多塑料制品是无法回收利用的。

㈢ 塑料的英语翻译 塑料用英语怎么说

塑料
[词典] plastic; plastics; plastic material; plastomer;
[例句]我在容器上盖了一片聚乙烯塑料薄膜，解决了版这个问题。权
I have overcome this problem by placing a sheet of polythene over the top of the container

㈣ 注塑英文翻译

文摘:

有效的封锁的非法放射性材料要求决定标准是敏感的物质利益,而不敏感材料的较小的兴趣。注射用于评估研究的敏感性的决策标准放射性威胁的情况。配置决策需要注射研究方法论上的因素,代表或简化实际田间情况。了解不同资源的相对影响注射方法对报警利率和其他测量结果为进一步解释结果是至关重要的注射的研究。
最完整、实际手法注入点源进一辆汽车数计算的轮廓线源定位方法。侧面随机本文报导的影响的研究对这种方法简化方法。我们评估的两field-deployed相对灵敏度

检测算法两个实验因素注射点源学习。第一个因素了“为中心”与“随机”点源在车辆位置计数的侧面。第二个因素会出现其他增加整个注入剖面("姿态注入”仅仅中央)或添加“钉状”注入剖面的部分最接近点源位置(“钉注射”)。一个

集75 059存档车辆数从一个侧面操作的边界注射配有模拟低能量射线点源打算模仿额外的高度浓缩铀或钚元素。评估的结果是通过注射曲线报警率与

注射源大小)和派生措施,最低检测率(MDC)数必须达到探测概率为95%。
结果表明,注射方法结合算法研究结果差异性影响以不同的方式。对总体统计结果,集中穗注射产量较高的检测敏感性胜于为中心的简介注射,随机穗注射产量更高的检测灵敏度

集中穗注射。相反地,对于结果,集中精力窗口比穗注射敏感性胜于收益率也集中剖面注射,随机穗注射产量更少的敏感性胜于集中穗注射。这些效应可能部分归因于背景抑制型材在车辆检测统计。虽然观测效应(10%)并不很大,喷射方法两率报警影响检测算法研究相反的方向。这些结果通知方法论的决定和评估结果注射的研究。

㈤ 产品展示的英文怎么翻译

产品展示的英文翻译是Proct presentation。

其中Proct有产品的意思，presentation有展示的意思，两个单词都版是名词，结合在一起权就是“产品展示”。

拓展资料：

“产品展示”的英文例句：

1、这个厂家在大厅里做产品展示：The factory is in the hall doing proct display.

2、一个产品的关键在于产品展示：The key to a proct is proct presentation.

3、产品展示对于商品的销售很重要：Proct presentation is important for the sale of good.

㈥ 注塑：用英语一个单词解释怎么说！常用或专业术语！

injection molding 美式
injection moulding 英式
injection molded parts 我也见到过

㈦ 关于塑料的英文翻译（需专业）

解答如下：GE Plastics
Generally refers to volume of proction, use wide, forming good, cheap plastic, such as polyethylene, polypropylene, phenolic, etc..
GE Plastics has five varieties, namely, polyethylene, polypropylene, PVC, polystyrene and ABS. They are thermoplastic.
Polyethylene (PE)
Polyethylene is a plastic instry in the most proctive varieties. Polyethylene is opaque or translucent, light crystalline plastics, with excellent low temperature performance (the lowest temperature can reach -70 ~ -100 ℃), electrical insulation, chemical stability, capability of most of the acid-base erosion, but not heat. Polyethylene suitable for use on injection molding, blow molding, extrusion methods such as machining. PE can be classified according to different densities: low density polyethylene LDPE; high density polyethylene HDPE; linear low density polyethylene LLDPE.
Polypropylene (PP)
Polypropylene is a thermoplastic derived from propylene polymerization, usually colorless, translucent solid, odorless non-toxic, a density of 0.90 ~ 0.919 grams / cm, is the lightest of GE Plastics, which highlight the advantages are in the water-resistant cooking characteristics, corrosion resistance, strength, rigidity and transparency better than polyethylene, drawback is poor low-temperature impact resistance, easy to aging, but can be respectively, through modification and adding additives to be improved. Polypropylene proction methods are slurry, Liquid Bulk and Gas Act 3.
Polyvinyl chloride (PVC)
PVC is a polymer derived from vinyl chloride plastics, by adding plasticizers, its hardness can be changed significantly. It is made of hard procts as well as soft procts have a wide range of uses. Methods of proction of PVC suspension polymerization, emulsion polymerization, and bulk polymerization, suspension polymerization in the main.
Polystyrene (PS)
Polystyrene is a versatile polymer of styrene, appearance and transparent, but the shortcomings of brittle hair, therefore, polybutadiene can be made by adding high impact polystyrene (HTPS). The main proction methods of polystyrene bulk polymerization, suspension polymerization and solution polymerization.
ABS
ABS resin is acrylonitrile - butadiene - styrene monomer co-polymerization of three kinds of procts, referred to as ABS terpolymers. The plastic because of its components A (acrylonitrile), B (butadiene) and S (styrene) in the proportion of different composition, as well as differences in manufacturing methods, the nature there are very different. ABS for injection molding and extrusion processing, so its use also mainly the proction of these two types of procts.

㈧ 塑料英语翻译

化学(星期二)被普遍认为是一个双分子终止因过氧自由基. 形成过氧自由基氧化氯在高分子材料可以作为衡量方法 氧化速度和程度高分子材料. 由过氧自由基反应形成碳或氧自由基氧化的分解.

㈨ 英语翻译 主要是前面的“塑料制品”怎么翻译,至于有限公司好像是“CO.,LTD”是吧

Plastic CO.,LTD

㈩ 塑料制品英语怎么说

plastic procts
plastic ware