外开槽英语怎么说及英文翻译

A. 英语达人帮我翻译一下slot这个词以及一些复合词，谢谢。

n.位置；狭槽，水沟；[人名] 斯洛特；硬币投币口
vt.跟踪，跟着足迹追赶；开槽于

B. 英文翻译，机械专业，满意的才会采纳，还有追加奖分（可以商量）

手工翻译的。

镗孔用以扩大以其他工艺所制成的孔或者是在中空工件上制作一个圆形的内部横截面（图23.1h）。镗床所用切削工具类似于旋转刀具，安置在镗杆上（23.17a），从而可以加工镗件的全部长度。镗杆必须非常牢固，这样才能最大限度地减小刀具的偏离，才能保持尺寸准确，才能避免振颤。镗杆最好选用高弹性材料（如碳化钨）。镗杆在设计和制造时都考虑到了减震性能。
相对较小工件的镗孔可用车床来完成；大型的工件则在镗床上完成。这类机械工具或直或平，并能从事很多工作，如旋转、刮面、切槽以及切角等。在平置镗床中，工件放在一个可以沿轴向和径向水平移动的工作台上。切削刀具安装在主轴箱内旋转的轴上，这个轴能够做垂直和纵向移动。另外，机器转轴上还可以安装钻头、铰刀、攻丝以及铣刀。立式镗床（图23.18）类似车床，工件沿着垂直轴线旋转，并且可以加工最大直径为2.5米的工件。

C. 有关包装机械的英语翻译

1. floors: Stroker, V belt
2. printing units: The air operated diaphragm pump pad, the cross valve, the cross valve coil, the trachea, air operated attaches
3. slots department: The cutting tool, picks out paper knife
4. other: The bolt
highest printing speed
economy printing speed
most greatly enters the paper area
most minor offense paper area
effective printer area
adaptation cardboard
chromatography precision
slot precision

就这些

D. 物流海运专用术语<英语》

看看如下的内容吧:
A
alongside -- The side of a vessel.
B
barrel -- A measurement term that refers to 42 gallons of liquid at 60 degrees Fahrenheit (15.56 degrees Celsius).
berth -- The structure where a vessel is secured for the loading and unloading cargo.
bonded warehouse -- A warehouse authorized by customs authorities for the storage of goods on which payment of ties is deferred until the goods are removed.
bow -- The front of a vessel. Also see "stern."
breakbulk cargo -- Loose, non-containerized procts. Examples include steel slabs and coils.
bulk cargo -- Loose cargo shipped in the cargo hold of a vessel without mark and count. Examples include coal, grain and sulfur.
bunker -- A maritime term that refers to fuel used aboard a vessel.
C
cargo -- Freight loaded into a vessel.
cargo manifest -- A list of all cargo carried on a specific vessel voyage.
cargo tonnage -- Most ocean freight is billed on the basis of weight or measurement tons (W/M). Weight tons can be expressed in short tons of 2,000 pounds, long tons of 2,240 pounds or metric tons of 1,000 kilos (2204.62 pounds). Measurement tons are usually expressed in cargo measurements of cubic feet (one cubic foot equals 0.03 cubic meters) or cubic meters (one cubic meter equals 35.31 cubic feet). Typically, 40 cubic feet (1.13 cubic meters) is the measurement standard.
carrier -- Any person or entity who, in a contract of carriage, undertakes to perform or procure the performance of carriage by rail, road, sea, air, inland waterway or by a combination of such transportation modes.
chassis -- A frame with wheels and container-locking devices in order to secure the container for movement.
container -- A truck trailer body that can be detached from the chassis for loading into a vessel, a railcar, or stacked in a container depot. Containers may be ventilated, insulated, refrigerated, flat rack, vehicle rack, open top, bulk liquid or equipped with interior devices. A container may be 20 feet (6.1 meters), 40 feet (12.19 meters), 45 feet (13.72 meters), 48 feet (14.63 meters) or 53 feet (16.15 meters) in length, eight feet (2.44 meters) or eight feet, six inches (2.59 meters) in width, and eight feet, six inches (2.59 meters) or nine feet, six inches (2.9 meters) in height.
container freight station (CFS) -- A shipping dock where cargo is loaded ("stuffed") into or unloaded ("stripped") from containers. Container reloading from/to rail or motor carrier equipment is a typical activity.
container terminal -- An area designated for the stowage of cargo in containers. Usually accessible by truck, railroad and marine transportation, the terminal is where containers are picked up, dropped off, maintained and stored.
containerization -- Stowage of general or special cargo in a container for transport in various modes.
containerload -- A cargo load sufficient in size to fill a container either by cubic measurement or by weight.
container port -- A seaport that features cargo terminals developed specifically to handle marine cargo containers.
D
dock -- For ships, a cargo-handling area where a vessel normally ties up. For land transportation, a loading or unloading platform at an instrial location or carrier terminal.
doublestack train -- A train using specialized railcars that enable marine cargo containers to be stacked one atop another.
draft -- The number of feet (or meters) that the hull of a ship is beneath the surface of the water.
dry bulk container -- A container constructed to carry grain, powder and other free-flowing solids in bulk. Used in conjunction with a tilt chassis or platform.
dry cargo -- Cargo that is solid in nature and normally does not require temperature control.
E
export -- Shipment of goods to a foreign country.
F
feeder service -- Cargo to/from regional ports are transferred to/from a central hub port for a long-haul ocean voyage.
feeder vessel -- A short-sea vessel that transfers cargo between a central hub port and smaller spoke ports.
FEUs -- Maritime abbreviation for "40-foot equivalent units," which refers to containers that are 40 feet (12.19 meters) in length. One FEU is equal to two TEUs, or "20-foot equivalent units." See "TEUs."
flat car -- A railcar without a roof and walls.
flat rack/flat bed container -- A container with no sides and frame members at the front and rear for cargo loading from the sides and top.
foreign-trade zone -- A free port in a country divorced from Customs authority but under government control. Merchandise, except that which is prohibited, may be stored in the zone without being subject to import ty regulations.
free port -- A restricted area at a seaport used for the handling of ty-exempt import goods.
freight -- Refers to either the cargo carried or the charges assessed for carriage of cargo.
freight forwarder -- A person whose business is to act as an agent on behalf of the shipper. A freight forwarder frequently makes the booking reservation.
G
gateway -- A point at which freight moving from one territory to another is interchanged between transportation lines.
gross weight -- The entire weight of goods, packaging, container and freight car, ready for shipment. Generally, the combined weight limit of the cargo, container and tractor for highway transport is 80,000 pounds (36,287.39 kilograms).
H
hatch -- The opening in the deck of a vessel, providing access to the cargo hold.
I
import -- Shipment of goods from a foreign country.
inland carrier -- A transportation line that hauls export or import traffic between ports and inland points.
intermodal -- A shipping term denoting the interchangeable movement of cargo containers between different modes of transportation, primarily ship, truck and train, where the equipment is compatible with the multiple transport systems.
J
Jacob's ladder -- A rope ladder suspended from the side of a vessel that is used for boarding.
just in time (JIT) -- In this method of inventory control, warehousing is minimal or non-existent: The container is a "movable" warehouse and must arrive neither too early nor too late
K
knot -- One knot is equal to one nautical mile (6,076 feet or 1,851.96 meters) per hour. In the early sailing days, speed was measured by tossing overboard a log secured by a line. Knots were tied into the line at intervals of approximately six feet (1.83 meters). The number of knots measured was then compared to the time required to travel the distance of 1,000 knots in the line.
L
laden -- Loaded aboard a vessel.
landbridge -- The movement of cargo, by water, from one country through the port of another country, by rail or truck, to an inland point in that country or to a third country. For example, cargo from Japan is landbridged across the United States to France.
liquid bulk -- Cargo that is fluid in nature and typically transported in tankers. Examples include oil and other petroleum procts.
longshoreman -- An indivial employed in a port to load and unload cargo vessels.
loose -- Without packing.
M
maritime -- Business pertaining to commerce or navigation transacted upon the sea or in seaports.
meter -- One meter is equal in length to 3.28 feet or 39.37 inches.
metric ton -- One metric ton is equal in weight to 2,204.62 pounds or 1,000 kilograms.
mile -- One mile is equal to 5,280 feet or 1.61 kilometers on land. Also see "nautical mile."
mini-landbridge -- An intermodal system for transporting containers by ocean and then by rail or motor to a port previously served as an all-water move. For example, cargo from China is mini-landbridged through Seattle to New York.
multimodal -- Synonymous with "intermodal" for all practical purposes.
N
nautical mile -- One nautical mile is equal in length to 607,612 feet or 1.85 kilometers, which is the distance of one minute of longitude measured at the equator. Also see "mile."
near-dock railyard -- A cargo facility used primarily to sort marine cargo containers and assemble into trainloads bound for common destinations. These railyards are located inland, in close proximity to a port waterfront.
non-vessel operating common carrier (NVOCC) -- A cargo consolidator in ocean trades that will buy space from a carrier and subsell it to smaller shippers. The NVOCC concts itself as an ocean carrier, except that it will not provide the actual ocean or intermodal service.
O
on-dock railyard -- A cargo facility used primarily to sort marine cargo containers and assemble them into trainloads bound for common destinations. These railyards are located on a port waterfront.
origin -- The location where a freight shipment begins its movement.
overheight cargo -- Freight that is more than eight feet high, or too tall to fit into a standard container.
P
pallet -- A platform with or without sides, on which a number of packages or pieces may be loaded to facilitate handling by a forklift or similar functioning equipment.
pier -- The structure where a vessel is secured for the loading and unloading cargo.
piggyback -- A transportation arrangement whereby truck trailers and their loads are carried and moved by train to a destination.
port -- There are three common definitions:
1. A harbor with piers or docks.
2. The left side of a ship when facing the bow. Also see "starboard."
3. An opening in a vessel's side, used for handling freight.
port of call -- A port where a vessel discharges or receives freight.
port of entry -- A port where cargo enters a country and is unloaded.
port of exit -- A port where cargo is loaded and leaves a country.

Q
quay -- A structure attached to land to which a vessel is moored. Also see “berth," "dock" and "pier."
R
ramp -- A railroad terminal where containers are received or delivered and trains are loaded or discharged.
reefer -- An instry term for a refrigerated or temperature-controlled container.
relay -- The transfer of containers from one ship to another when both vessels are controlled by the same network (carrier) manager.
revenue ton -- A ton measurement on which shipments are freighted. If cargo is rated as weight or measure (W/M), whichever proces the higher revenue will be considered the revenue ton. Weights are based on metric tons and measures are based on cubic meters. Hence, one revenue ton is equal to one metric ton (2204.62 pounds) or one cubic meter (35.31 cubic feet).
roll-on roll-off (Ro/Ro) -- A method of ocean cargo service using a vessel with ramps, which allow wheeled containers, trailers or vehicles to be loaded and unloaded without the use of cranes.
S
service -- A string of vessels that makes a particular voyage and serves a particular market.
ship chandler -- An indivial or company selling equipment and supplies to ships.
shipper -- The person or company who usually is the supplier or owner of commodities shipped. Also called the consignor.
ships --There are nine basic types of ships:
1. barge carriers -- Ships designed to transport barges.
2. bulk carriers -- All vessels designed to carry bulk cargo, such as grain, fertilizers, ore and oil.
3. combination passenger and cargo ships -- Cargo vessels with the capacity for 13 or more passengers.
4. freighters -- Comprises refrigerated and unrefrigerated breakbulk vessels, containerships, partial containerships, roll-on roll-off vessels and barge carriers.
5. full containerships -- Vessels equipped with permanent container cells for container storage, with little or no space for other types of cargo.
6. general cargo carriers -- This category includes breakbulk freighters, car carriers, cattle carriers, pallet carriers and timber carriers.
7. partial containerships -- Multipurpose containerships with one or more, but not all, cargo compartments fitted with permanent container cells. The remaining compartments are used for noncontainerized cargo.
8. roll-on roll-off vessels -- Specialized ships designed to carry wheeled containers, trailers and vehicles using onboard ramps.
9. tankers -- Ships fitted with tanks for storage of liquid cargo, such as crude petroleum and petroleum procts, chemicals, liquefied gas, wine and molasses.
short ton -- One short ton is equal in weight to 2,000 pounds or 0.91 metric tons.
side loader -- A lift truck fitted with lifting attachments operating on one side for handling containers.
slip -- A ship's berth between two piers.
spreader -- Equipment designed to lift containers by their corner casters.
stack car -- An articulated five-platform railcar that allows containers to be doublestacked one atop another.
stack train -- A rail service whereby railcars carry containers doublestacked on specially operated unit trains.
starboard -- The right side of a ship when facing the bow. Also see "port."
stern -- The end of a vessel. Also see "bow."
stevedore -- A person or company that employs longshore workers and establishes agreements to load or unload ships.
stowage -- A marine term that refers to loading freight into vessels' cargo holds.
straddle carrier -- Mobile truck equipment that is capable of lifting containers within its own framework.
supply chain -- A logistical management system that integrates the sequence of activities from delivery of raw materials to the manufacturer to delivery of the finished proct to the customer. "Just in time" is an example of supply chain management.
T
tariff -- A publication that sets forth the charges, rates and rules of ports and transportation companies.
terminal -- An assigned area where containers are prepared for loading into a vessel, train or truck, or are stored immediately after discharge from the vessel, train or truck.
TEUs -- Maritime abbreviation for "20-foot equivalent units," which refers to containers that are 20 feet (6.1 meters) in length. Two TEUs are equal to one FEU. Also see "FEU."
transship -- To transfer goods from one transportation line to another, or from one ship to another.
turnaround -- In water transportation, the time between the arrival and departure of a ship from a port.
U
unit load -- Packages loaded onto a pallet, in a crate or any other way that enables them to be handled at one time as a unit.
unit train -- A train comprising a specified number of railcars that remain together as a unit until reaching a designated destination.
unitization -- The consolidation of a quantity of indivial items into one large shipping unit to facilitate handling. Also: The loading of one or more large items of cargo onto a single piece of equipment, such as a pallet.

V
vanning -- A marine term for stowing cargo in a container
warehouse -- A place for the reception, delivery, consolidation, distribution and storage of cargo.
W
warehousing -- The storage of cargo.
weights and measures --
1. One cubic meter is equal to 35.31 cubic feet.
2. One long ton, or gross ton, is equal to 2,240 pounds or 1,016.05 kilograms.
3. One measurement ton is equal to 40 cubic feet or one cubic meter.
4. One metric ton, or kilo ton, is equal to 2,204.62 pounds or 1,000 kilograms.
5. One short ton, or net ton, is equal to 2,000 pounds or 907.18 kilograms
Y
yard -- This term commonly refers to a railroad yard with many rail tracks for assembling, storing or switching freight trains.

E. 求关于纸箱机械设备的英语单词，单色开槽机，双色开槽机，订箱机，磨切机，压痕机，等。这些用英语怎么说

单色开槽机：single color slotter/slotting machine
双色开槽机：double color slotter/slotting machine
钉箱机：carton stapler/stitcher
模切机：die cutting machine/die-cutter
压痕机：creasing machine

F. 想问有关制作及加工瓷砖的几个专业名词相关英文怎么说

直切开介Straight cut interface
圆边倒角Round corner
阳角Yang Angle
开槽Slot
开窑Open kiln
磨边Edge grinding
原装边Original edges
胶辊印花机Roller printing machine

瓷砖英语

瓷砖 Tiles

腰线 Borders，waist line

花片Decoration

釉面砖 Glazed tiles

玻化砖Vetrified tiles

抛光砖 Polished tiles,luster concept

仿古砖 Rustic tiles, Archaized tiles

全抛光Full polish

半抛光Semi-polish

雅光 Matte Mat surface

瓷质瓷砖 Porcelain tiles

陶质瓷砖 Ceramic tiles

吸水率 Warter absorbtion

墙面砖 wall tiles

地板砖 floor tiles

木纹砖wood finish

马赛克 mosaic

金属釉 glazed metallic tiles

瓷砖填缝剂 tile-seam filling,

防水填缝剂waterproof grout

通体砖：interior tile ,plain colours
通体 full body

色坯 colour body

白坯 white body

double loading 微粉砖

soluble salt and pepper渗花斑点砖

polished salt and pepper抛光斑点砖

glazed porcelain 和glazed ceramic瓷体釉面砖和施釉陶瓷地砖

瓷砖的分类
瓷砖按照功能分为地砖、墙砖及腰线砖等。

地砖：按花色分为仿西班牙砖、玻化砖、釉面砖、防滑砖及渗花抛光砖等。

墙砖：按花色可分为玻化墙砖、印花墙砖。

腰线砖：多为印花砖。为了配合墙砖的规格，腰线砖一般定为60mm×200mm的幅面。

瓷砖按工艺分为:釉面砖、通体砖、抛光砖、玻化砖、陶瓷锦砖。

釉面砖：指砖表面烧有釉层的砖。这种砖分为两类：一是用陶土烧制的;另一种是用瓷土烧制的,目前的家庭装修约80%的购买者选此砖为地面装饰材料。

通体砖：这是一种不上釉的瓷质砖,有很好的防滑性和耐磨性。一般所说的"防滑地砖"大部分是通体砖。

抛光砖：通体砖经抛光后就成为抛光砖,这种砖的硬度很高,非常耐磨。

玻化砖：这是一种高温烧制的瓷质砖,是瓷砖中最硬的一种。

陶瓷锦砖：又名马赛克，规格多，薄而小，质地坚硬，耐酸、耐碱、耐磨、不渗水，抗压力强，不易破碎，彩色多样。

Packing 包装：

Piece 片

Weight 重量

Quantity 数量

Quality 质量

Tiles stand 砖展架

Carton 纸箱

Wooden Pallet 木托

Logo on the backside 底标

tile surface with with wax 加蜡

tile placement :face to face, back to back,back to face 包装：面对面，背靠背，面对背

separation paper 隔纸

foam paper泡沫纸

white paper白纸

plastic corner塑料角

paper corner纸护角

foam warp泡沫角

barcode条形码

white box白色纸箱

brown box棕色纸箱

shade No.色号

lot No.批号

standard pallet标准托

euro pallet欧托

heat soak protective wrap热缩膜

plastic wrap缠绕膜

air bay for pallet fixing固托气袋

Stamp,label,tag,tab 标签

Catalogue 目录

Sample 样板

Payment term 付款方式：

Balance 余款

First payment 定金

Comission 佣金

Franchisee 专卖店

Reimbursement 返点

Insurance 保险

Sea freight 海运费

标准要求 Technical Requirement:

尺寸及偏差 SIZE AND DIFFERENCE

品名NAME

规格SIZE

厚度THICKNESS

等级CLASS

边直度（合格） SIDE STRAIGHT (EXCELLENT)

直角度（合格） RIGHT ANGLE (EXCELLENT)

表面平整度（合格） SURFACE FLATNESS (EXCELLENT)

表面质量（合格） SURFACE QUALITY (EXCELLENT)

吸水率 WATER ABSORPTION

破坏强度 BREAKING STRENGTH

断裂模数 MODULUS OF RUPTURE

抗釉裂性 RESISTANCE TO THERMAL SHOCK

抗冻性 RESISTANCE TO CRAZING

耐污染性 RESISTANCE TO POLLUTION

耐家庭化学试剂 RESISTANCE TO HOUSEHOLD CHEMICAL REAGENT

耐游泳池盐类RESISTANCE TO SWIMMING POOL ALKALI

边长 LENGTH

通体玻化砖 FULL BODY VETRIFIED TILES

中心弯曲度 CENTER CURVATURE

翘曲度 WARPAGE

边弯曲度 SIDE CURVATURE

平均值 MEAN VALUE

单个值 SINGLE VALUE