超滤器英语怎么说及英文翻译

㈠ 请帮忙翻译成英文

4, cathode electrophoresis system
The system consists of electrophoretic main channel, the Deputy groove, loop mixing system, paint system, rectifier power supply, standby power, a very fluid circulation system, water chiller, cooling tower, electrophoresis paint transfer tank, paint liquid temperature control device, ultrafiltration equipment, water equipment, exhaust systems and electronic control systems and other components.
1, electrophoresis coating tunnel
a, electrophoresis coating line with the tunnel structure, electrophoresis coating line after the washing by the electrophoresis chamber and two-part segment. Chamber body is made of carbon steel materials, after the washing tunnel made of stainless steel, welding seam closed with a continuous process, does not allow drip phenomenon. With both ends of the electrophoresis tank maintenance platform.
b, section of the station ends with retaining plate spray, with water dripping between the adjacent station segment, the bottom paragraph was dripping "mountain-type" type, easy to automatically back to spray liquid tank.
c, in the electrophoresis section and with drainage devices.
d, E body parts are sealed by continuous welding, does not allow drip.
2, process tank
a, electrophoresis tank with main and groove structure, the main channel with Vice-slot outlet, the volume-based deputy slot 10% of tank volume, tank material used δ6 carbon steel plate, slot coating δ8-10mm glass wall steel anti-corrosion materials capability of 20,000 volts DC voltage (any point not less than 12,000 volts), the main circulating pump electrophoresis corrosion pump, spare one. Electrophoresis tank connected between the main and auxiliary tank pipe, electrophoresis tank based temperature control system, temperature control accuracy of ± 2 ℃.
b, electrophoresis tank and rinse tank after the end of the bottom of the concave groove located for easy discharge and cleaning.
c, electrophoresis tank at the bottom of all main and installation of cycle tubes and Venturi mixing nozzle, improve circulation within the ability of electrophoretic paint to ensure the electrophoresis tank cycles per hour, not less than four times the bottom of the flow rate of 0.4m / s, the surface flow rate of 0.2 m / s.
d, electrophoresis tank side wall and bottom of the fixed anode tube with insulation and nozzle devices.
e, electrophoresis tank with a good grounding.
f, after the rinse tank are all main and auxiliary tank structure, are equipped with loop mixing device does not allow the bubble after the rinse tank overflow.
g, electrophoresis tank with 800mm wide on both sides of the maintenance channel, sufficient lighting.
3 spray device
a, mainly by the spray pump, spray pipes, valves, pressure gauges, nozzles and other components.
b, spray pipe designed with spray nozzle arranged in the pressure tube from top to bottom balance.
c, nozzle with universal ball head quick change polypropylene nozzles, UF washing by atomizing nozzle.
d, UF washing process uses reverse washing method, the same as Bath sink installed connecting pipe, the following process to facilitate the bath overflow forward working procere.
e, set up the tunnel at the top of hanging chain protection.
4, auxiliary equipment
a, anode system
From the anode, the anode liquid storage tanks, pumps and piping and instrumentation composed of infusion. Anode structure, a tubular anode area ratio of anode: cathode = (6-4): 1. Anode system with flow meter, the anode fluid through the pump cycle, control the electrical conctivity of the anode. Played when the anode process fluid conctivity value, the water will automatically open the water valve, liquid storage tank into the anode. Pump and liquid tank anode material using SUS (or PVC) material, infusion tube by use SUS (or PVC), electrode using SUS.
b, ultrafiltration system
Super filter by the volume, ultra filter circulation pump (pump with corrosion) reserve a pump, ultra-filtrate storage tank, tank and pump cleaning ultrafiltrate, ultrafiltrate infusion pumps, piping pressure gauge, flow meter, bag filter etc.. Ultrafilter permeable ability 1.0t / h (only cleaning).
c, feeding systems
Using one-component mixing system. The system consists of mixing tank (stainless steel), motor, cycloidal recer, mixing pumps, filters, infusion pumps and other components.

d, rectifier
Rectifier output voltage is 0-250V adjustable, 0-250A output current is adjustable.
e, water system
By the reverse osmosis tube, pump, piping, raw water storage tank and pumps, water tanks and pumps, dosing devices, pressure gauges, conctivity meter etc.. Water supply capacity of 1.5T / h (with a combination of processes).
f, water sealing system
Water sealing system for sealing horizontal pumps. UF water seal fluid liquid, seal pressure 0.35MPa.
g, refrigeration system
By the refrigeration unit, cooling towers, chilled water pumps and piping pressure gauge, thermometer, insulation materials and other components. Electrophoresis lacquer paint mixing process or will continue to accumulate heat, so it is necessary to install the circulatory system in the electrophoretic paint plate heat exchanger, resulting from the freezer chilled water supply heat exchanger, automatic lowering the temperature of paint. Freezer power about 10 million kilocalories for environmentally friendly refrigeration units.

㈡ 时间紧迫，哪位朋友能帮忙翻译一下一些设备的英文名称悬赏300分！谢谢！

这是一套骨胶处理系统的主要设备清单，量很大。请按照“悬赏300分！谢谢！”给分。

1骨料回流螺旋 aggregate backflow screw
2无轴螺旋输送机 shaftless screw conveyor
3三螺旋锥形混合机 triple spiral conical mixer
4斗提机 bucket elevator
5挤胶机摇摆头 rubber extruder swinging head
6减速机 speed recer
7奈莫泵 NEMO pump
8耐腐蚀泵 corrosion resistance pump
9排污泵 sewage pump
10自吸泵 self suction pump
11屏蔽泵 shielded pump
12潜水泵 submersible pump
13管道泵 pipeline pump
14泥浆泵 slurry pump
15骨素泵 ossein pump
16助滤泵 drainage filter pump
17预涂泵 pre-coat pump
18加压泵 pump(booster pump)
19螺旋式浓浆泵 spiral thick slurry pump
20溶气水泵 air-in-water pump (air associated water pump)
21计量泵 metering pump
22风冷式压缩机 air cooled compressor
23水冷式压缩机 water cooled compressor
24发电机 generator
25汽轮发电机 turbo generator
26柴油发电机 diesel generator
27预破碎机 pre-crusher
28棉饼破碎机 cotton cake crusher
29骨碎研磨机 bone grinding machine
30磨粉机 grinder
31隔栅机 grid machine
32筛粉分离器sieve separator
33重力分离机 gravity separator
34旋转筛 rotating screen
35纸板过滤机 paper filtration
36圆盘过滤机disk filter
37UF超滤机UF ultrafilter
38棉饼过滤机 cotton cake filter
39脱酸机 acid extractor
40圆盘捞渣机 disc slag-dredger
41麻石除尘器 Mashi st remover
42废水处理系统 waste water treatment system
43油水分离机 oil-water separator
44真空吸滤机vacuum suction filter
45碳滤水柱 carbone water filter column
46搅拌槽 agitating tank
47潜水搅拌器 submerged agitator
48三螺旋锥形混合器 triple spiral conical mixer
49压棉机 cotton presser
50空气加热器 air heater
51空气冷却器 air cooler
52再生降温热交换器 regenerative desuperheater heat exchanger
53蒸煮水帘系统boiling (digesting) wet curtain system
54蒸汽减温器 steam desuperheater
55氨制冷系统 ammonia refrigeration system
56乙二醇系统 glycol system
57蒸汽制冷机steam refrigeration machine
58双头螺旋蒸发器 double spiral evaporator
59空气干燥机 air dryer
60冷干机 refrigeration dryer
61冷冻式干燥机 refrigerant air drier
62蒸汽锅炉 steam boiler
63重油罐 heavy oil tank
64酸碱储罐 acid-base storage tank
65储气罐 air storage tank
66中和池 neutralization tank
67浸灰池 liming pool
68骨仓 bone silo
69浸酸桶 pickling barrel
70PLC控制器 PLC controller
71电动执行机构 electric actuator
72软启动器 soft starter
73电容补偿柜 capacitor compensation cabinet
74地磅测量 loadometer (weight bridge) measure
75节流阀 throttle (choke) valve
76旋塞阀 plug valve
77调节阀 control (adjusting) valve
78减压阀 pressure recing valve
79柱塞阀 plunger valve
80紫外线杀菌器 ultraviolet sterilizer

㈢ 英语翻译

These distillation steps are carefully designed for maximum efficiency with utmost care exercised in critical parts of the equipment to ensure safe, smooth and continuous operation with particular regards to polymer fouling. Optimized amounts of acrylonitrile stabilizers are used throughout all recovery and purification steps. To meet the usual customer requirements, final proct acrylonitrile is stabilized with hudroquinone monomethyl ether.
这些蒸馏步骤经过了仔细设计以达到最大的效率，这些设计在设备的关键部件上加以了极度的小心，以确保安全、顺利和连续的工作，其中特别关注于聚合物的结垢。丙烯腈稳定剂的最佳数量在所有回收和纯化步骤中从头到尾都予以采用。为了满足通常用户的要求，最终产物丙烯晴用氢醌单甲醚进行稳定化。
Waste treatment and disposal
废物处理和处置
Unavoidably, a certain amount of waste material is proced .Aqueous liquids are the largest problem both in quantity and composition. The quantity is fixed by the water proced in the reaction and the process purges which are minimized by complete recycling. Composition is mostly nitriles and other nitrogen compounds but the ammonium sulfate from the mother liquor of the crystallization step must be considered. For the most economical disposal of these wastes, both chemical and biological treatment is used. 一定数量的废料不可避免地会产生。含水液体不管是数量上还是组分上都是最大的问题。数量是固定的，它源自于反应和过程清除产生的水，它们通过完整的循环而最小化。组分大多是腈和其他氮化物，但是来自于结晶化步骤母液的硫化铵必须予以考虑。关于这些废料最经济的处置，化学的和生物的处理方法都可采用。
Organic liquids-mostly cyanohydrins and acetonitrile-are easily and completely burned. 有机液体（多数是氰醇和乙腈）很容易完全燃烧。The only solid wastes are catalysts fines which are scrubbed by the ammonium sulfate solution and these are easily settled and filtered or these are easily settled and filtered or centrifuged. 唯一的固体废料是催化剂细粒，它们用硫化铵溶液擦洗，它们很容易沉淀和过滤，或者离心分离。The high silica content of the metal components of this solid waste. But a treatment has been developed to recover the valuable metal components , so that practically only silica remains to be disposed of. 这种固体废物的金属成分中有高的二氧化硅含量。但是，已开发出一种处理方法来回收有价值的金属成分，因此实际上，只有二氧化硅还需要加以处置。
Gaseous wastes consist of off-gases from the water absorber, and their resial content of nitriles-acrylonitriles and hydrogen cyanide-is less than 10 ppm e to carefully design and operation of the absorber. These are discharged to the atmosphere through a stack of some heat has been considered by burning these off-gases in a boiler with conventional fuel , but because of the very low propylene content , this becomes a matter of economical evaluation case by case.
气体废物由来自吸水剂（器）的废气构成，它们残留的腈－丙烯腈和氰化氢的含量，由于仔细的设计和吸收剂（器）的工作而不到10 ppm。废气通过烟囱排放到大气中，也已考虑在采用常规燃料的锅炉中燃烧这些废气获得一些热量，但是因为丙烯的含量很少，所以成为了一件要根据情况考虑的经济评估问题。

㈣ 碰焊机,油压拉伸机,压焊缝机,的英文怎么写

1. butt-welder 碰焊机
2. oil pressure drawframe 油压拉伸机
3. pressure weld seamer 压焊缝机