外開槽英語怎麼說及英文翻譯

A. 英語達人幫我翻譯一下slot這個詞以及一些復合詞，謝謝。

n.位置；狹槽，水溝；[人名] 斯洛特；硬幣投幣口
vt.跟蹤，跟著足跡追趕；開槽於

B. 英文翻譯，機械專業，滿意的才會採納，還有追加獎分（可以商量）

手工翻譯的。

鏜孔用以擴大以其他工藝所製成的孔或者是在中空工件上製作一個圓形的內部橫截面（圖23.1h）。鏜床所用切削工具類似於旋轉刀具，安置在鏜桿上（23.17a），從而可以加工鏜件的全部長度。鏜桿必須非常牢固，這樣才能最大限度地減小刀具的偏離，才能保持尺寸准確，才能避免振顫。鏜桿最好選用高彈性材料（如碳化鎢）。鏜桿在設計和製造時都考慮到了減震性能。
相對較小工件的鏜孔可用車床來完成；大型的工件則在鏜床上完成。這類機械工具或直或平，並能從事很多工作，如旋轉、刮面、切槽以及切角等。在平置鏜床中，工件放在一個可以沿軸向和徑向水平移動的工作台上。切削刀具安裝在主軸箱內旋轉的軸上，這個軸能夠做垂直和縱向移動。另外，機器轉軸上還可以安裝鑽頭、鉸刀、攻絲以及銑刀。立式鏜床（圖23.18）類似車床，工件沿著垂直軸線旋轉，並且可以加工最大直徑為2.5米的工件。

C. 有關包裝機械的英語翻譯

1. floors: Stroker, V belt
2. printing units: The air operated diaphragm pump pad, the cross valve, the cross valve coil, the trachea, air operated attaches
3. slots department: The cutting tool, picks out paper knife
4. other: The bolt
highest printing speed
economy printing speed
most greatly enters the paper area
most minor offense paper area
effective printer area
adaptation cardboard
chromatography precision
slot precision

就這些

D. 物流海運專用術語<英語》

看看如下的內容吧:
A
alongside -- The side of a vessel.
B
barrel -- A measurement term that refers to 42 gallons of liquid at 60 degrees Fahrenheit (15.56 degrees Celsius).
berth -- The structure where a vessel is secured for the loading and unloading cargo.
bonded warehouse -- A warehouse authorized by customs authorities for the storage of goods on which payment of ties is deferred until the goods are removed.
bow -- The front of a vessel. Also see "stern."
breakbulk cargo -- Loose, non-containerized procts. Examples include steel slabs and coils.
bulk cargo -- Loose cargo shipped in the cargo hold of a vessel without mark and count. Examples include coal, grain and sulfur.
bunker -- A maritime term that refers to fuel used aboard a vessel.
C
cargo -- Freight loaded into a vessel.
cargo manifest -- A list of all cargo carried on a specific vessel voyage.
cargo tonnage -- Most ocean freight is billed on the basis of weight or measurement tons (W/M). Weight tons can be expressed in short tons of 2,000 pounds, long tons of 2,240 pounds or metric tons of 1,000 kilos (2204.62 pounds). Measurement tons are usually expressed in cargo measurements of cubic feet (one cubic foot equals 0.03 cubic meters) or cubic meters (one cubic meter equals 35.31 cubic feet). Typically, 40 cubic feet (1.13 cubic meters) is the measurement standard.
carrier -- Any person or entity who, in a contract of carriage, undertakes to perform or procure the performance of carriage by rail, road, sea, air, inland waterway or by a combination of such transportation modes.
chassis -- A frame with wheels and container-locking devices in order to secure the container for movement.
container -- A truck trailer body that can be detached from the chassis for loading into a vessel, a railcar, or stacked in a container depot. Containers may be ventilated, insulated, refrigerated, flat rack, vehicle rack, open top, bulk liquid or equipped with interior devices. A container may be 20 feet (6.1 meters), 40 feet (12.19 meters), 45 feet (13.72 meters), 48 feet (14.63 meters) or 53 feet (16.15 meters) in length, eight feet (2.44 meters) or eight feet, six inches (2.59 meters) in width, and eight feet, six inches (2.59 meters) or nine feet, six inches (2.9 meters) in height.
container freight station (CFS) -- A shipping dock where cargo is loaded ("stuffed") into or unloaded ("stripped") from containers. Container reloading from/to rail or motor carrier equipment is a typical activity.
container terminal -- An area designated for the stowage of cargo in containers. Usually accessible by truck, railroad and marine transportation, the terminal is where containers are picked up, dropped off, maintained and stored.
containerization -- Stowage of general or special cargo in a container for transport in various modes.
containerload -- A cargo load sufficient in size to fill a container either by cubic measurement or by weight.
container port -- A seaport that features cargo terminals developed specifically to handle marine cargo containers.
D
dock -- For ships, a cargo-handling area where a vessel normally ties up. For land transportation, a loading or unloading platform at an instrial location or carrier terminal.
doublestack train -- A train using specialized railcars that enable marine cargo containers to be stacked one atop another.
draft -- The number of feet (or meters) that the hull of a ship is beneath the surface of the water.
dry bulk container -- A container constructed to carry grain, powder and other free-flowing solids in bulk. Used in conjunction with a tilt chassis or platform.
dry cargo -- Cargo that is solid in nature and normally does not require temperature control.
E
export -- Shipment of goods to a foreign country.
F
feeder service -- Cargo to/from regional ports are transferred to/from a central hub port for a long-haul ocean voyage.
feeder vessel -- A short-sea vessel that transfers cargo between a central hub port and smaller spoke ports.
FEUs -- Maritime abbreviation for "40-foot equivalent units," which refers to containers that are 40 feet (12.19 meters) in length. One FEU is equal to two TEUs, or "20-foot equivalent units." See "TEUs."
flat car -- A railcar without a roof and walls.
flat rack/flat bed container -- A container with no sides and frame members at the front and rear for cargo loading from the sides and top.
foreign-trade zone -- A free port in a country divorced from Customs authority but under government control. Merchandise, except that which is prohibited, may be stored in the zone without being subject to import ty regulations.
free port -- A restricted area at a seaport used for the handling of ty-exempt import goods.
freight -- Refers to either the cargo carried or the charges assessed for carriage of cargo.
freight forwarder -- A person whose business is to act as an agent on behalf of the shipper. A freight forwarder frequently makes the booking reservation.
G
gateway -- A point at which freight moving from one territory to another is interchanged between transportation lines.
gross weight -- The entire weight of goods, packaging, container and freight car, ready for shipment. Generally, the combined weight limit of the cargo, container and tractor for highway transport is 80,000 pounds (36,287.39 kilograms).
H
hatch -- The opening in the deck of a vessel, providing access to the cargo hold.
I
import -- Shipment of goods from a foreign country.
inland carrier -- A transportation line that hauls export or import traffic between ports and inland points.
intermodal -- A shipping term denoting the interchangeable movement of cargo containers between different modes of transportation, primarily ship, truck and train, where the equipment is compatible with the multiple transport systems.
J
Jacob's ladder -- A rope ladder suspended from the side of a vessel that is used for boarding.
just in time (JIT) -- In this method of inventory control, warehousing is minimal or non-existent: The container is a "movable" warehouse and must arrive neither too early nor too late
K
knot -- One knot is equal to one nautical mile (6,076 feet or 1,851.96 meters) per hour. In the early sailing days, speed was measured by tossing overboard a log secured by a line. Knots were tied into the line at intervals of approximately six feet (1.83 meters). The number of knots measured was then compared to the time required to travel the distance of 1,000 knots in the line.
L
laden -- Loaded aboard a vessel.
landbridge -- The movement of cargo, by water, from one country through the port of another country, by rail or truck, to an inland point in that country or to a third country. For example, cargo from Japan is landbridged across the United States to France.
liquid bulk -- Cargo that is fluid in nature and typically transported in tankers. Examples include oil and other petroleum procts.
longshoreman -- An indivial employed in a port to load and unload cargo vessels.
loose -- Without packing.
M
maritime -- Business pertaining to commerce or navigation transacted upon the sea or in seaports.
meter -- One meter is equal in length to 3.28 feet or 39.37 inches.
metric ton -- One metric ton is equal in weight to 2,204.62 pounds or 1,000 kilograms.
mile -- One mile is equal to 5,280 feet or 1.61 kilometers on land. Also see "nautical mile."
mini-landbridge -- An intermodal system for transporting containers by ocean and then by rail or motor to a port previously served as an all-water move. For example, cargo from China is mini-landbridged through Seattle to New York.
multimodal -- Synonymous with "intermodal" for all practical purposes.
N
nautical mile -- One nautical mile is equal in length to 607,612 feet or 1.85 kilometers, which is the distance of one minute of longitude measured at the equator. Also see "mile."
near-dock railyard -- A cargo facility used primarily to sort marine cargo containers and assemble into trainloads bound for common destinations. These railyards are located inland, in close proximity to a port waterfront.
non-vessel operating common carrier (NVOCC) -- A cargo consolidator in ocean trades that will buy space from a carrier and subsell it to smaller shippers. The NVOCC concts itself as an ocean carrier, except that it will not provide the actual ocean or intermodal service.
O
on-dock railyard -- A cargo facility used primarily to sort marine cargo containers and assemble them into trainloads bound for common destinations. These railyards are located on a port waterfront.
origin -- The location where a freight shipment begins its movement.
overheight cargo -- Freight that is more than eight feet high, or too tall to fit into a standard container.
P
pallet -- A platform with or without sides, on which a number of packages or pieces may be loaded to facilitate handling by a forklift or similar functioning equipment.
pier -- The structure where a vessel is secured for the loading and unloading cargo.
piggyback -- A transportation arrangement whereby truck trailers and their loads are carried and moved by train to a destination.
port -- There are three common definitions:
1. A harbor with piers or docks.
2. The left side of a ship when facing the bow. Also see "starboard."
3. An opening in a vessel's side, used for handling freight.
port of call -- A port where a vessel discharges or receives freight.
port of entry -- A port where cargo enters a country and is unloaded.
port of exit -- A port where cargo is loaded and leaves a country.

Q
quay -- A structure attached to land to which a vessel is moored. Also see 「berth," "dock" and "pier."
R
ramp -- A railroad terminal where containers are received or delivered and trains are loaded or discharged.
reefer -- An instry term for a refrigerated or temperature-controlled container.
relay -- The transfer of containers from one ship to another when both vessels are controlled by the same network (carrier) manager.
revenue ton -- A ton measurement on which shipments are freighted. If cargo is rated as weight or measure (W/M), whichever proces the higher revenue will be considered the revenue ton. Weights are based on metric tons and measures are based on cubic meters. Hence, one revenue ton is equal to one metric ton (2204.62 pounds) or one cubic meter (35.31 cubic feet).
roll-on roll-off (Ro/Ro) -- A method of ocean cargo service using a vessel with ramps, which allow wheeled containers, trailers or vehicles to be loaded and unloaded without the use of cranes.
S
service -- A string of vessels that makes a particular voyage and serves a particular market.
ship chandler -- An indivial or company selling equipment and supplies to ships.
shipper -- The person or company who usually is the supplier or owner of commodities shipped. Also called the consignor.
ships --There are nine basic types of ships:
1. barge carriers -- Ships designed to transport barges.
2. bulk carriers -- All vessels designed to carry bulk cargo, such as grain, fertilizers, ore and oil.
3. combination passenger and cargo ships -- Cargo vessels with the capacity for 13 or more passengers.
4. freighters -- Comprises refrigerated and unrefrigerated breakbulk vessels, containerships, partial containerships, roll-on roll-off vessels and barge carriers.
5. full containerships -- Vessels equipped with permanent container cells for container storage, with little or no space for other types of cargo.
6. general cargo carriers -- This category includes breakbulk freighters, car carriers, cattle carriers, pallet carriers and timber carriers.
7. partial containerships -- Multipurpose containerships with one or more, but not all, cargo compartments fitted with permanent container cells. The remaining compartments are used for noncontainerized cargo.
8. roll-on roll-off vessels -- Specialized ships designed to carry wheeled containers, trailers and vehicles using onboard ramps.
9. tankers -- Ships fitted with tanks for storage of liquid cargo, such as crude petroleum and petroleum procts, chemicals, liquefied gas, wine and molasses.
short ton -- One short ton is equal in weight to 2,000 pounds or 0.91 metric tons.
side loader -- A lift truck fitted with lifting attachments operating on one side for handling containers.
slip -- A ship's berth between two piers.
spreader -- Equipment designed to lift containers by their corner casters.
stack car -- An articulated five-platform railcar that allows containers to be doublestacked one atop another.
stack train -- A rail service whereby railcars carry containers doublestacked on specially operated unit trains.
starboard -- The right side of a ship when facing the bow. Also see "port."
stern -- The end of a vessel. Also see "bow."
stevedore -- A person or company that employs longshore workers and establishes agreements to load or unload ships.
stowage -- A marine term that refers to loading freight into vessels' cargo holds.
straddle carrier -- Mobile truck equipment that is capable of lifting containers within its own framework.
supply chain -- A logistical management system that integrates the sequence of activities from delivery of raw materials to the manufacturer to delivery of the finished proct to the customer. "Just in time" is an example of supply chain management.
T
tariff -- A publication that sets forth the charges, rates and rules of ports and transportation companies.
terminal -- An assigned area where containers are prepared for loading into a vessel, train or truck, or are stored immediately after discharge from the vessel, train or truck.
TEUs -- Maritime abbreviation for "20-foot equivalent units," which refers to containers that are 20 feet (6.1 meters) in length. Two TEUs are equal to one FEU. Also see "FEU."
transship -- To transfer goods from one transportation line to another, or from one ship to another.
turnaround -- In water transportation, the time between the arrival and departure of a ship from a port.
U
unit load -- Packages loaded onto a pallet, in a crate or any other way that enables them to be handled at one time as a unit.
unit train -- A train comprising a specified number of railcars that remain together as a unit until reaching a designated destination.
unitization -- The consolidation of a quantity of indivial items into one large shipping unit to facilitate handling. Also: The loading of one or more large items of cargo onto a single piece of equipment, such as a pallet.

V
vanning -- A marine term for stowing cargo in a container
warehouse -- A place for the reception, delivery, consolidation, distribution and storage of cargo.
W
warehousing -- The storage of cargo.
weights and measures --
1. One cubic meter is equal to 35.31 cubic feet.
2. One long ton, or gross ton, is equal to 2,240 pounds or 1,016.05 kilograms.
3. One measurement ton is equal to 40 cubic feet or one cubic meter.
4. One metric ton, or kilo ton, is equal to 2,204.62 pounds or 1,000 kilograms.
5. One short ton, or net ton, is equal to 2,000 pounds or 907.18 kilograms
Y
yard -- This term commonly refers to a railroad yard with many rail tracks for assembling, storing or switching freight trains.

E. 求關於紙箱機械設備的英語單詞，單色開槽機，雙色開槽機，訂箱機，磨切機，壓痕機，等。這些用英語怎麼說

單色開槽機：single color slotter/slotting machine
雙色開槽機：double color slotter/slotting machine
釘箱機：carton stapler/stitcher
模切機：die cutting machine/die-cutter
壓痕機：creasing machine

F. 想問有關製作及加工瓷磚的幾個專業名詞相關英文怎麼說

直切開介Straight cut interface
圓邊倒角Round corner
陽角Yang Angle
開槽Slot
開窯Open kiln
磨邊Edge grinding
原裝邊Original edges
膠輥印花機Roller printing machine

瓷磚英語

瓷磚 Tiles

腰線 Borders，waist line

花片Decoration

釉面磚 Glazed tiles

玻化磚Vetrified tiles

拋光磚 Polished tiles,luster concept

仿古磚 Rustic tiles, Archaized tiles

全拋光Full polish

半拋光Semi-polish

雅光 Matte Mat surface

瓷質瓷磚 Porcelain tiles

陶質瓷磚 Ceramic tiles

吸水率 Warter absorbtion

牆面磚 wall tiles

地板磚 floor tiles

木紋磚wood finish

馬賽克 mosaic

金屬釉 glazed metallic tiles

瓷磚填縫劑 tile-seam filling,

防水填縫劑waterproof grout

通體磚：interior tile ,plain colours
通體 full body

色坯 colour body

白坯 white body

double loading 微粉磚

soluble salt and pepper滲花斑點磚

polished salt and pepper拋光斑點磚

glazed porcelain 和glazed ceramic瓷體釉面磚和施釉陶瓷地磚

瓷磚的分類
瓷磚按照功能分為地磚、牆磚及腰線磚等。

地磚：按花色分為仿西班牙磚、玻化磚、釉面磚、防滑磚及滲花拋光磚等。

牆磚：按花色可分為玻化牆磚、印花牆磚。

腰線磚：多為印花磚。為了配合牆磚的規格，腰線磚一般定為60mm×200mm的幅面。

瓷磚按工藝分為:釉面磚、通體磚、拋光磚、玻化磚、陶瓷錦磚。

釉面磚：指磚表面燒有釉層的磚。這種磚分為兩類：一是用陶土燒制的;另一種是用瓷土燒制的,目前的家庭裝修約80%的購買者選此磚為地面裝飾材料。

通體磚：這是一種不上釉的瓷質磚,有很好的防滑性和耐磨性。一般所說的"防滑地磚"大部分是通體磚。

拋光磚：通體磚經拋光後就成為拋光磚,這種磚的硬度很高,非常耐磨。

玻化磚：這是一種高溫燒制的瓷質磚,是瓷磚中最硬的一種。

陶瓷錦磚：又名馬賽克，規格多，薄而小，質地堅硬，耐酸、耐鹼、耐磨、不滲水，抗壓力強，不易破碎，彩色多樣。

Packing 包裝：

Piece 片

Weight 重量

Quantity 數量

Quality 質量

Tiles stand 磚展架

Carton 紙箱

Wooden Pallet 木托

Logo on the backside 底標

tile surface with with wax 加蠟

tile placement :face to face, back to back,back to face 包裝：面對面，背靠背，面對背

separation paper 隔紙

foam paper泡沫紙

white paper白紙

plastic corner塑料角

paper corner紙護角

foam warp泡沫角

barcode條形碼

white box白色紙箱

brown box棕色紙箱

shade No.色號

lot No.批號

standard pallet標准托

euro pallet歐托

heat soak protective wrap熱縮膜

plastic wrap纏繞膜

air bay for pallet fixing固托氣袋

Stamp,label,tag,tab 標簽

Catalogue 目錄

Sample 樣板

Payment term 付款方式：

Balance 餘款

First payment 定金

Comission 傭金

Franchisee 專賣店

Reimbursement 返點

Insurance 保險

Sea freight 海運費

標准要求 Technical Requirement:

尺寸及偏差 SIZE AND DIFFERENCE

品名NAME

規格SIZE

厚度THICKNESS

等級CLASS

邊直度（合格） SIDE STRAIGHT (EXCELLENT)

直角度（合格） RIGHT ANGLE (EXCELLENT)

表面平整度（合格） SURFACE FLATNESS (EXCELLENT)

表面質量（合格） SURFACE QUALITY (EXCELLENT)

吸水率 WATER ABSORPTION

破壞強度 BREAKING STRENGTH

斷裂模數 MODULUS OF RUPTURE

抗釉裂性 RESISTANCE TO THERMAL SHOCK

抗凍性 RESISTANCE TO CRAZING

耐污染性 RESISTANCE TO POLLUTION

耐家庭化學試劑 RESISTANCE TO HOUSEHOLD CHEMICAL REAGENT

耐游泳池鹽類RESISTANCE TO SWIMMING POOL ALKALI

邊長 LENGTH

通體玻化磚 FULL BODY VETRIFIED TILES

中心彎曲度 CENTER CURVATURE

翹曲度 WARPAGE

邊彎曲度 SIDE CURVATURE

平均值 MEAN VALUE

單個值 SINGLE VALUE