电泳英语怎么翻译

A. 请帮忙翻译成英文

4, cathode electrophoresis system
The system consists of electrophoretic main channel, the Deputy groove, loop mixing system, paint system, rectifier power supply, standby power, a very fluid circulation system, water chiller, cooling tower, electrophoresis paint transfer tank, paint liquid temperature control device, ultrafiltration equipment, water equipment, exhaust systems and electronic control systems and other components.
1, electrophoresis coating tunnel
a, electrophoresis coating line with the tunnel structure, electrophoresis coating line after the washing by the electrophoresis chamber and two-part segment. Chamber body is made of carbon steel materials, after the washing tunnel made of stainless steel, welding seam closed with a continuous process, does not allow drip phenomenon. With both ends of the electrophoresis tank maintenance platform.
b, section of the station ends with retaining plate spray, with water dripping between the adjacent station segment, the bottom paragraph was dripping "mountain-type" type, easy to automatically back to spray liquid tank.
c, in the electrophoresis section and with drainage devices.
d, E body parts are sealed by continuous welding, does not allow drip.
2, process tank
a, electrophoresis tank with main and groove structure, the main channel with Vice-slot outlet, the volume-based deputy slot 10% of tank volume, tank material used δ6 carbon steel plate, slot coating δ8-10mm glass wall steel anti-corrosion materials capability of 20,000 volts DC voltage (any point not less than 12,000 volts), the main circulating pump electrophoresis corrosion pump, spare one. Electrophoresis tank connected between the main and auxiliary tank pipe, electrophoresis tank based temperature control system, temperature control accuracy of ± 2 ℃.
b, electrophoresis tank and rinse tank after the end of the bottom of the concave groove located for easy discharge and cleaning.
c, electrophoresis tank at the bottom of all main and installation of cycle tubes and Venturi mixing nozzle, improve circulation within the ability of electrophoretic paint to ensure the electrophoresis tank cycles per hour, not less than four times the bottom of the flow rate of 0.4m / s, the surface flow rate of 0.2 m / s.
d, electrophoresis tank side wall and bottom of the fixed anode tube with insulation and nozzle devices.
e, electrophoresis tank with a good grounding.
f, after the rinse tank are all main and auxiliary tank structure, are equipped with loop mixing device does not allow the bubble after the rinse tank overflow.
g, electrophoresis tank with 800mm wide on both sides of the maintenance channel, sufficient lighting.
3 spray device
a, mainly by the spray pump, spray pipes, valves, pressure gauges, nozzles and other components.
b, spray pipe designed with spray nozzle arranged in the pressure tube from top to bottom balance.
c, nozzle with universal ball head quick change polypropylene nozzles, UF washing by atomizing nozzle.
d, UF washing process uses reverse washing method, the same as Bath sink installed connecting pipe, the following process to facilitate the bath overflow forward working procere.
e, set up the tunnel at the top of hanging chain protection.
4, auxiliary equipment
a, anode system
From the anode, the anode liquid storage tanks, pumps and piping and instrumentation composed of infusion. Anode structure, a tubular anode area ratio of anode: cathode = (6-4): 1. Anode system with flow meter, the anode fluid through the pump cycle, control the electrical conctivity of the anode. Played when the anode process fluid conctivity value, the water will automatically open the water valve, liquid storage tank into the anode. Pump and liquid tank anode material using SUS (or PVC) material, infusion tube by use SUS (or PVC), electrode using SUS.
b, ultrafiltration system
Super filter by the volume, ultra filter circulation pump (pump with corrosion) reserve a pump, ultra-filtrate storage tank, tank and pump cleaning ultrafiltrate, ultrafiltrate infusion pumps, piping pressure gauge, flow meter, bag filter etc.. Ultrafilter permeable ability 1.0t / h (only cleaning).
c, feeding systems
Using one-component mixing system. The system consists of mixing tank (stainless steel), motor, cycloidal recer, mixing pumps, filters, infusion pumps and other components.

d, rectifier
Rectifier output voltage is 0-250V adjustable, 0-250A output current is adjustable.
e, water system
By the reverse osmosis tube, pump, piping, raw water storage tank and pumps, water tanks and pumps, dosing devices, pressure gauges, conctivity meter etc.. Water supply capacity of 1.5T / h (with a combination of processes).
f, water sealing system
Water sealing system for sealing horizontal pumps. UF water seal fluid liquid, seal pressure 0.35MPa.
g, refrigeration system
By the refrigeration unit, cooling towers, chilled water pumps and piping pressure gauge, thermometer, insulation materials and other components. Electrophoresis lacquer paint mixing process or will continue to accumulate heat, so it is necessary to install the circulatory system in the electrophoretic paint plate heat exchanger, resulting from the freezer chilled water supply heat exchanger, automatic lowering the temperature of paint. Freezer power about 10 million kilocalories for environmentally friendly refrigeration units.

B. 电泳漆供应商英语翻译

At present, there are few manufacturers procing automotive paint with self-owned brand. Only this company and Daqiao chemical group have achieved some proction scale. This company, with its own brand, is the only provider of wide range of automotive paint for original factories, and the selling of both home appliance coating and automotive finish has reached hundreds of millions of yuan.

C. 镀锌、镀光、电泳漆、喷塑用英语怎么说它们的英文简称分别是什么急求……

镀锌：Zinc-plated
镀光：Gilt-plated
电泳漆：Electrophoretic-coated
喷塑：powder-coated

D. 电泳处理如何用英语翻译

Electrophoretic processing

E. 求助：电泳条带变浅 英语怎么说

琼脂来糖凝胶电泳跑完，DNA条带颜色浅怎自么回事原因有以下： 1、 可以考虑是不是样品不纯，目的产物与杂带相差不大，所以要多跑一段时间才有尾巴。参考marker,marker应该不会有。如果有的话说明配胶有问题。 2 、琼脂糖检测DNA一般去1~5微升原液，加2微升溴酚蓝便可，注意上样浓度； 3、可能是原液浓度太大造成的； 4、可能DNA已降解。 5、在提取前对样品进行一定的脱腐处理呀。很简单。有一种TENP buffer，文献中查的到的。 6、 DNA降解避免核酸酶污染。 7、 DNA上样量过多，可以减少凝胶中DNA上样量。 8、 所用电泳条件不合适，可以将电泳时电压不应超过20V/cm，温度＜30℃,巨大DNA链，温度应 ＜15℃，核查所用电泳缓冲液是否有足够的缓冲能力。 9、 DNA样含盐过高，可以在电泳前通过乙醇沉淀去除过多的盐。 10、 有蛋白污染，可以采用电泳前酚抽提去除蛋白。 11、 DNA变性，电泳前勿加热，用20mM NaCl缓冲液稀释DNA