主振型英语怎么说及英文单词
㈠ 请问“振型迭加”的英语怎么说不要GOOGLE翻译器的答案哟！
superposition of vibration mode
㈡ “震动”的英语怎么说
震动的英文：shake
词汇解析
shake
英[ʃeɪk]美[ʃek]
vt. 动摇；摇动；震动
vi. 动摇；摇动；震动；发抖
n. 摇动；哆嗦
例：As soon as he got inside, the dog shook himself.
他一进去，那条狗就摇头摆尾。
例：She picked up the bag of salad and gave it a shake.
她拿起了那袋沙拉摇了摇。
近义词
1、rock
英[rɒk]美[rɑk]
n. 岩石；摇滚乐；暗礁
vt. 摇动；使摇晃
vi. 摇动；摇晃
例：The hills above the valley are bare rock.
河谷上面的山是光秃秃的岩石。
2、wave
英[weɪv]美[wev]
vi. 波动；起伏；摇动
vt. 卷（烫）发；使成波浪形
n. 波动；波浪；挥手示意
例：The shock waves of the earthquake were felt in Teheran.
在德黑兰感觉到了地震的震波。
㈢ 什么叫主振型
主振型从概念上讲其实就是振型，一个意思。
主振型：这种结构位移形状保持不变的振动形式可称为主振型或振型。
它具有两个特点：
①. 在振动过程中，两个质点具有相同的频率和相同的相位角；
②. 在振动过程中，两个质点的位移在数值上随时间而变化，但二者的比值始终保持不变。
㈣ 主振型是什么
采用刚性楼板假定时，T周期最长的振型为主振型。非刚性楼板时，参与质量最大的振型是主振型。
振型：在振动的任一时刻，各质体位移的比值保持不变，即振动形状保持不变，将此振动形式称为振型。
振型有如下特点：
1. 结构自振频率数=结构自由度数量；
2. 每一个结构自振频率对应一个结构振型；
3. 第一自振频率叫基频，对应第一振型；
4. 结构每一振型表示结构各质点的一种运动特性：各质点之间的位移和速度保持固定比值；
5. 要使结构按某一振型振动，条件是：各质点之间的初位移和初速度的比值应具有该振型的比值关系；
6. 根据多质点体系自由振动运动微分方程的通解，在一般初始条件下，结构的振动是由各主振型的简谐振动叠加而成的复合振动；
7. 因为振型越高，阻尼作用造成的衰减越快，所以高振型只在振动初始才比较明显，以后则逐渐衰减，因此，工程的抗震设计中仅考虑较低的几个振型。
㈤ 英语 语法成分 主语 谓语 宾语等或者结构的英文简写。例如 S V ADJ ADV 之类的
如下：
1、主语 subject S
2、谓语 predicate V
3、表语 predicative P
4、宾语 object O
5、状语 adverbial a
6、定语 attribute attrib
简介：
主语是谓语的陈述对象，如“我写字”中的“我”就是主语，它做出“写”这个动作，“写”则是谓语，用来陈述主语的动作，而“字”是接受谓语“写”这个动作的对象，它因此被称为宾语，有的语法书也称它为“客体”或“受体”。
主语是句子中的陈述对象，与英语语法也有相似之处。常常由名词、 代词、或 名词性短语充当。形容词、动词、 谓语性短语和 主谓短语也可充当主语。 句子成分划分时，主语符号为双横线。
㈥ 主振型的名词解释
对于简单的判断而言，采用刚性楼板假定时，T1为主振型，就是周期最长的那个振型。非刚性楼板时，参与质量最大的振型是主振型。
㈦ 英语archive mode怎么翻译
archive mode翻译成中文的意思是：归档模式。
关键词汇：archive
词语分析：
音标：英['ɑːkaɪv]美['ɑːrkaɪv]
n.档案；档案馆
vt.存档
短语：
Asia Art Archive亚洲艺术文献库 ; 亚洲艺术文献
Flashback Data Archive闪回数据归档
Tape Archive磁带归档 ; 磁带备份 ; 磁带存档 ; 将文件备份到磁带上
project archive工程档案 ; 建设工程档案 ; 项目归档 ; 项目档案
例句：
Import thearchiveasnormal.
正常导入归档文件。
Backup,archive,orrestoredata.
备份，档案，或者存储数据。
Mostof theStasiarchivewassaved.
西斯塔的大部分档案被保留了下来。
UsetheArchivefeature.
使用存档特性。
ThearchivewillspanMultiplevolumes.
该归档文件将跨越多个卷。
近义词：
n. 档案馆；档案文件
chancery
㈧ 那位英文高手帮帮忙翻译一下，必重谢！！
Engineering Mechanics I (4 credits)
Summary: Static mechanics: statics basic axioms, constraints and binding objects and trying to force analysis;plane balanced system of forces, the concept of couple, couple, Department of balance; plane balance arbitrary system of forces and material balance system, internal force calculation truss; space balanced system of forces, center of gravity calculation; friction angle and self-locking phenomenon, there are friction balance. Kinematics: Kinematics points; simple rigid-body movement; the synthesis of movement points; rigid body planar motion. Dynamics: the basic equations of particle dynamics; dynamics general theorem; D'Alembert principle.
Engineering Mechanics II (5 credits)
Summary: Introction; axial tensile and compression stress bar, deformation and strength calculation; material in tensile and compression mechanical properties; shear and extrusion of practical calculation; the geometric properties of planar graph; reverse; bending internal forces; bending stress; bending deformation; stress state and strength of the theory; combination of deformation; energy methods; hyperstatic structure; dynamic load; alternating stress; bar stability.
Engineering Materials (2 credits)
Summary: metal and alloy properties; metal structure and crystallization of the crystal; Fe-C alloy; steel heat treatment; alloy steel, cast iron, non-ferrous metals.
Theory of Machines and Mechanisms (3 credits)
Summary: Introction; structure analysis; plane body motion analysis; analysis of planar mechanisms; mechanical efficiency and self-locking; mechanical balance; mechanical operation and regulation of the speed of fluctuations; planar linkage and its design; cam mechanism and its design; gear and its design; gear systems and their design; other common institutions.
Courses
Computer graphics (2 credits)
Computer graphics is to examine the use of computer generated graphics processing and the principles, methods and technology courses. This course in AutoCAD mapping software commonly used as a tool to introce computer-aided design system and drawing principles, methods and technology. The main elements are: AutoCAD's basic concept and operation of commonly used drawing and editing commands, graphics object properties, display control and information, accurate drawings, graphics and design mark filling, Block, external reference, mapping parts drawing and assembly drawing , three-dimensional modeling.
Mechanical vibration (2 credits)
Summary: The single degree of freedom systems: free vibration, forced vibration damped and forced vibration damping; the calculation of natural frequencies; resonance law; rotor critical speed; based vibration; vibration isolation. Two degrees of freedom systems: free vibration and forced vibration; Lagrange equation; the calculation of natural frequencies; vibration mode; resonance law; the basic principles of dynamic absorbers. Multi-degree of freedom system: stiffness matrix, the determination of the inertia matrix; free vibration differential equation of free vibration; the calculation of natural frequencies; vibration mode; transfer matrix method the basic theory and method of profile.
Database Management System (2 credits)
Summary: The purpose of this course is to enable students to understand the basic concepts of database technology, database technology in computer-aided design and manufacturing and the role of the network. Have a more advanced database management systems, applications to carry out its medium-complexity of the database application systems. Include: Introction; the basic operation of the database; query and statistics; programming; form design; report design; menu design; example database applications such as systems development.
Practice
Engineering Drawing Practice (1 credit)
Hand-painted master engineering drawings (bracket structure map of the worm work plans, sliding bearing assembly) methods to improve students, drawing capacity; students scientific, rigorous style of study, students practice and the practical ability
Metalworking Practice (4 credits)
Summary: In this paper, metalworking practice task, the role of apparatus and equipment commonly used measurement principle, maintenance, use and so on, were traditional processing Internship Program: turner, fitter, casting,, welders technical training, as well as the NC Internship Program internship, including CNC lathes, CNC milling machine, CNC wire cutting attachment designed by students graphics, programming, simulation processing, data processing network, embodies the comprehensive machinery manufacturing, design and innovation.
Mechanical principles of curriculum design (1 credit)
Summary: The guide Shaper agencies, to determine the implementation of each component of the movement and its coordination of the relationship between body movement to determine the program to complete the body size of the movement system design, drawing the movement diagram, an analysis of their movement and learn to mapping function using MATLAB software to deal with institutions guide the displacement, velocity, acceleration image.
㈨ 振字的英语怎么写
动词
1.（摇动; 挥动） shake; flap; wield
2.（奋起） brace up; rise with force and spirit
释义 振（Inspiring）：振，商的开国君主汤的祖先。他是曹圉的孙子，冥的儿子。冥死后，他成为商族首领。 振 ①振颤，摇动。参“振寒”、“振掉”、“振拉”。 ②奋起，暴发。参“振发”。