塑料產品亮面翻譯英語怎麼講

㈠ 塑料滑套用英語怎麼說

塑料滑套
翻譯結果：
Plastic sliding sleeve

㈡ 塑料英語諧音怎麼說

你好!
塑料
plastic 英[ˈplæstɪk] 美[ˈplæstɪk]
n. 整形; 塑料製品; 〈口〉（使用）信用卡; 可塑體;
adj. 可塑的，塑性的，受回范的，柔軟的; 造型答的，塑造的，給與形態的; 塑料[塑膠]的，塑料[塑膠]制的，合成樹脂做的; 有形成力的，有創造力的;
[例句]A lot of the plastics that carmakers are using cannot be recycled.
汽車製造商使用的許多塑料製品是無法回收利用的。

㈢ 塑料的英語翻譯 塑料用英語怎麼說

塑料
[詞典] plastic; plastics; plastic material; plastomer;
[例句]我在容器上蓋了一片聚乙烯塑料薄膜，解決了版這個問題。權
I have overcome this problem by placing a sheet of polythene over the top of the container

㈣ 注塑英文翻譯

文摘:

有效的封鎖的非法放射性材料要求決定標準是敏感的物質利益,而不敏感材料的較小的興趣。注射用於評估研究的敏感性的決策標准放射性威脅的情況。配置決策需要注射研究方法論上的因素,代表或簡化實際田間情況。了解不同資源的相對影響注射方法對報警利率和其他測量結果為進一步解釋結果是至關重要的注射的研究。
最完整、實際手法注入點源進一輛汽車數計算的輪廓線源定位方法。側面隨機本文報導的影響的研究對這種方法簡化方法。我們評估的兩field-deployed相對靈敏度

檢測演算法兩個實驗因素注射點源學習。第一個因素了「為中心」與「隨機」點源在車輛位置計數的側面。第二個因素會出現其他增加整個注入剖面("姿態注入」僅僅中央)或添加「釘狀」注入剖面的部分最接近點源位置(「釘注射」)。一個

集75 059存檔車輛數從一個側面操作的邊界注射配有模擬低能量射線點源打算模仿額外的高度濃縮鈾或鈈元素。評估的結果是通過注射曲線報警率與

注射源大小)和派生措施,最低檢測率(MDC)數必須達到探測概率為95%。
結果表明,注射方法結合演算法研究結果差異性影響以不同的方式。對總體統計結果,集中穗注射產量較高的檢測敏感性勝於為中心的簡介注射,隨機穗注射產量更高的檢測靈敏度

集中穗注射。相反地,對於結果,集中精力窗口比穗注射敏感性勝於收益率也集中剖面注射,隨機穗注射產量更少的敏感性勝於集中穗注射。這些效應可能部分歸因於背景抑制型材在車輛檢測統計。雖然觀測效應(10%)並不很大,噴射方法兩率報警影響檢測演算法研究相反的方向。這些結果通知方法論的決定和評估結果注射的研究。

㈤ 產品展示的英文怎麼翻譯

產品展示的英文翻譯是Proct presentation。

其中Proct有產品的意思，presentation有展示的意思，兩個單詞都版是名詞，結合在一起權就是「產品展示」。

拓展資料：

「產品展示」的英文例句：

1、這個廠家在大廳里做產品展示：The factory is in the hall doing proct display.

2、一個產品的關鍵在於產品展示：The key to a proct is proct presentation.

3、產品展示對於商品的銷售很重要：Proct presentation is important for the sale of good.

㈥ 注塑：用英語一個單詞解釋怎麼說！常用或專業術語！

injection molding 美式
injection moulding 英式
injection molded parts 我也見到過

㈦ 關於塑料的英文翻譯（需專業）

解答如下：GE Plastics
Generally refers to volume of proction, use wide, forming good, cheap plastic, such as polyethylene, polypropylene, phenolic, etc..
GE Plastics has five varieties, namely, polyethylene, polypropylene, PVC, polystyrene and ABS. They are thermoplastic.
Polyethylene (PE)
Polyethylene is a plastic instry in the most proctive varieties. Polyethylene is opaque or translucent, light crystalline plastics, with excellent low temperature performance (the lowest temperature can reach -70 ~ -100 ℃), electrical insulation, chemical stability, capability of most of the acid-base erosion, but not heat. Polyethylene suitable for use on injection molding, blow molding, extrusion methods such as machining. PE can be classified according to different densities: low density polyethylene LDPE; high density polyethylene HDPE; linear low density polyethylene LLDPE.
Polypropylene (PP)
Polypropylene is a thermoplastic derived from propylene polymerization, usually colorless, translucent solid, odorless non-toxic, a density of 0.90 ~ 0.919 grams / cm, is the lightest of GE Plastics, which highlight the advantages are in the water-resistant cooking characteristics, corrosion resistance, strength, rigidity and transparency better than polyethylene, drawback is poor low-temperature impact resistance, easy to aging, but can be respectively, through modification and adding additives to be improved. Polypropylene proction methods are slurry, Liquid Bulk and Gas Act 3.
Polyvinyl chloride (PVC)
PVC is a polymer derived from vinyl chloride plastics, by adding plasticizers, its hardness can be changed significantly. It is made of hard procts as well as soft procts have a wide range of uses. Methods of proction of PVC suspension polymerization, emulsion polymerization, and bulk polymerization, suspension polymerization in the main.
Polystyrene (PS)
Polystyrene is a versatile polymer of styrene, appearance and transparent, but the shortcomings of brittle hair, therefore, polybutadiene can be made by adding high impact polystyrene (HTPS). The main proction methods of polystyrene bulk polymerization, suspension polymerization and solution polymerization.
ABS
ABS resin is acrylonitrile - butadiene - styrene monomer co-polymerization of three kinds of procts, referred to as ABS terpolymers. The plastic because of its components A (acrylonitrile), B (butadiene) and S (styrene) in the proportion of different composition, as well as differences in manufacturing methods, the nature there are very different. ABS for injection molding and extrusion processing, so its use also mainly the proction of these two types of procts.

㈧ 塑料英語翻譯

化學(星期二)被普遍認為是一個雙分子終止因過氧自由基. 形成過氧自由基氧化氯在高分子材料可以作為衡量方法 氧化速度和程度高分子材料. 由過氧自由基反應形成碳或氧自由基氧化的分解.

㈨ 英語翻譯 主要是前面的「塑料製品」怎麼翻譯,至於有限公司好像是「CO.,LTD」是吧

Plastic CO.,LTD

㈩ 塑料製品英語怎麼說

plastic procts
plastic ware