碳堆调压器英语怎么说及英文翻译

『壹』 求助太阳能灯具和LED灯具专业英语翻译，在下不胜感激

你好，很高兴为你解难！

LED经常碰到一下的专业词汇：

工作环境温度：Working temperature
工作电压：Supply voltage
额定电源频率Rated power frequency
额定功率Rated power
驱动电源效率Power supply efficiency
功率因数Power-factor(PF)
LED发光效率LED luminoue efficiency
灯具初始光通量Luminous flux
灯具出光效率 Lamp Flux
色温Color temperature
显色指数CRI: Ra>75
防护等级IP rating:IP65
使用寿命 Working life
外壳材质Shell material character
产品尺寸 Size(A*B*C mm)
重量 Net weight (kg)
包装尺寸 Packing dimensions(mm)

太阳能的相对多一点：

交流电
两种电的形态之一: 交变电流, 常用于住家中.

非晶
具有无周期型的原子结构.

非晶硅
有时简称为'a-硅'作为一种无序半导体材料用于增强等离子体化学蒸汽沉积(PECVD)工艺中. 此工艺可用来在不锈钢的基片上产生薄膜太阳能发电层.

安培 (Amps)
电流单位. 可视为电力流动的数量单位

光伏矩阵或发电板阵 (Array - photovoltaic)
太阳能发电板串联或并联连接在一起形成矩阵.

阻流二极管 (Blocking Diode)
用来防止反向电流, 在发电板阵中, 阻流二极管用来防止电流流向一个或数个失效或有遮影的发电板 (或一连串的太阳能发电板) 上. 在夜间或低电流出的期间, 防止电流从蓄电池流向光伏发电板矩阵."

光伏发电系统平衡 (BOS or Balance of System - photovoltaic)
光伏发电系统除发电板矩阵以外的部分. 例如开关, 控制仪表, 电力温控设备, 矩阵的支撑结构, 储电组件等等.

旁路二极管 (Bypass Diode)
是与光伏发电板并联的二极管. 用来在光电板被遮影或出故障时提供另外的电流通路.

光伏发电板 (电池) (Cell-photovoltaic)
太阳能发电板中最小的组件.

充电显示器 (表) (Charge Monitor/Meter)
用以测量电流安培量的装置, 安培表.

充电调节器 (Charge Regulator)
"用来控制蓄电池充电速度和/或充电状态的装置, 连接于光伏发电板矩阵和蓄电池组之间. 它的主要作用是防止蓄电池被光伏发电板过度充电, 同时监控光伏发电矩阵和/或蓄电池的电压."

组件 (Components)
指用于建立太阳能电源系统所需的其他装置.

交直流转换器 (Converter)
将交流电转换成直流电的装置.

晶体状 (Crystalline)
具有三维的重复的原子结构.

直流电 (DC)
"两种电流的形态之一, 常见于使用电池的物件中, 如收音机, 汽车, 手提电脑, 手机等等."

无序结构 (Disordered)
减小并消除晶格的局限性. 提供新的自由度, 从而可在多维空间中放置其他元素. 使它们以前所未有的方式互相作用. 这种技术应用多种元素以及复合材料. 它们在位置, 移动及成分上的不规则可消除结构的局限性, 因而产生新的局部规则环境. 而这些新的局部环境决定了这些材料的物理性质, 电子性质以及化学性质. 因此使得合成具有新颍机理的新型材料成为可能.

电网连接 - 光伏发电 (Grid-Connected - photovoltaic)
是一种由光伏发电板阵向电网提供电力的光伏发电系统. 这些系统可由供电公司或个别楼宇来运作.

直流交流转换器 (Inverter)
用来将直流电转换成交流电的装置.

千瓦 (Kilowatt)
1000瓦特, 一个灯泡通常使用40至100瓦特的电力.

百万瓦特 (Megawatt)
1,000,000瓦特

光伏发电板 (Mole - photovoltaic)
光伏电池以串联方式连在一起组成发电板.

奥佛电子 (Ovonic)
[以S. R. 奥佛辛斯基(联合太阳能公司创始人)及电子的组合命名] - 用来描述我们独有的材料, 产品和技术的术语.

奥佛辛斯基效应 (Ovshinsky effect)
一种特别的玻璃状薄膜在极小电压的作用下从一种非导体转变成一种半导体的效应..

并联连接 (Parallel Connection)
一种发电板连接方法. 这种连接法使电压保持相同, 但电流成倍数增加

峰值输出功能 (Peak Power)
持续一段时间(通常是10到30秒)的最大能量输出.

光伏 (Photovoltaic - PV)
光能到电能的直接转换.

光伏发电板 (电池) (Photovoltaic Cell)
经过特殊处理可将太阳能辐射转换成电力的半导体材料.

卷到卷工序 (Roll-to-Roll Process)
将整卷的基件连续地转变成整卷的产品的工序.

串联连接 (Series Connection)
电流不变电压倍增的连接方式.

太阳能 (Solar)
来自太阳的能量.

太阳能收集器 (Solar Collectors)
用以捕获来自太阳的光能或热能的装置. 太阳收集器用于太阳能热水器系统中 (常见于住家), 而光伏能收集器则是用于太阳能电力系统.

太阳能加热 (Solar Heating)
利用来自太阳的热能发电的技术或系统. 太阳能收集器用于太阳能热水器系统中(常见于住家), 而光伏能收集器则是用于太阳能电力系统中

太阳能发电模块或太阳能发电板 (Solar Mole or Solar Panel)
一些由太阳能发电板单元所组成的太阳能发电板板块.

稳定能量转换效率 (Stabilized Energy Conversion Efficiency)
长期的电力输出与光能输入比例.

系统, 平衡系统 (Systems; Balance of Systems)
"太阳能电力系统包括了光伏发电板矩阵和其它的部件. 这些部件可使这些太阳能发电板得以应用在需要可控直流电或交流电的住家和商业设施中. 用于太阳能电力系统的其它部件包括:接线和短路装置, 充电调压器,逆变器, 仪表和接地部件."

薄膜 (Thin-Film)
在基片上形成的很薄的材料层.

伏特 (Volts)
电动势能单位. 能促使一安培的电流通过一欧姆的电阻.

电压 (Voltage)
电势的量.

电压表 (Voltage Meter)
用以测量电压的装置.

瓦特 (Watts)
用电压乘以电流的值来衡量的电力度.

英文

AC
One of two types of electricity: Alternating Current; found in homes.

Amorphous
having an atomic structure that is not periodic.

Amorphous Silicon
"Sometimes abbreviated as ""a-Si"", amorphous silicon is used as a disordered semi-conctor material in the plasma-enhanced chemical vapor deposition (PECVD) process used to create thin-film solar cells on a stainless-steel substrate"

Amps
"The unit of electrical current. Can be thought of as the ""flow rate"" of electricity."

Array (photovoltaic)
moles wired together in series or parallel form an array.

Blocking Diode
"Used to prevent undesired current flow. In a PV array, the diode is used to prevent current flow towards a failed or shaded mole (or string of moles) or from the battery to the PV array ring periods of darkness or low current proction."

BOS or Balance of System (photovoltaic)
the parts of a photovoltaic system other than the array. For instance: switches, controls, meters, power conditioning equipment, supporting structure for the array, storage components, etc.

Bypass Diode
A diode connected in parallel with a PV cell to provide an alternative current path in case of cell shading or failure.

Cell (photovoltaic)
the smallest unit of a solar mole.

Charge Monitor/Meter
A device that measures amperage; amp meter.

Charge Regulator
" A device that controls the changing rate and/or state of charge for batteries. Wired between a photovoltaic array and a battery bank., its main job is to prevent the battery from being overcharged from the PV array, while monitoring the array and/or battery voltage."

Components
Refers to other devices used and needed when building a solar system

Converter
An Electroic Device that changes alternating current (ac) to direct current (dc).

Crystalline
having a repeating atomic structure in all three dimensions.

DC
"One of two types of Electricity Direct Current; found in anything that uses batteries. Radios, cars laptops, cell phones, etc."

Disordered
minimizing and lifting of lattice constraints, which provides new degrees of freedom, permitting the placement of elements in multi-dimensional spaces where they interact in ways not previously available. This allows the use of multi-elements and complex materials where positional, translational, and compositional disorder remove restrictions so new local order environments can be generated controlling the physical, electronic, and chemical properties of the material, thereby permitting the synthesis of new materials with new mechanisms.

Grid-Connected (photovoltaic)
a photovoltaic (PV) system in which the PV array supplies power to the grid. Systems can be operated by the utility or by indivial buildings.

Inverter
An Electronic Device that changes direct current (dc) to alternating current (ac).

Kilowatt
1000 watts; a light bulb uses 40-100 watts.

Megawatt
"1,000,000 watts"

Mole (photovoltaic)
cells wired together in series form a mole.

Ovonic
[after S.R. Ov(shinsky) + (electr)onic] - the term used to describe our proprietary materials, procts, and technologies.

Ovshinsky effect
The effect by which a specific glassy thin film switches from a nonconctor to a semiconctor upon application of a minimum voltage.

Parallel Connection
"Connection in which the voltage stays the same, but the amperage multiplies."

Peak Power
the maximum amount of energy available for a sustained period of time, typically 10 to 30 seconds.

Photovoltaic (PV)
direct conversion of light into electrical energy.

Photovoltaic Cell
The treated semi-conctor material that converts solar irradiance to electricity.

Roll-to-Roll Process
a process where a roll of substrate is continuously converted into a roll of proct.

Series Connection
Connection in which the current (amps) stays the same but the voltage multiplies.

Solar
Energy from the sun.

Solar Collectors
A device designed to capture light or heat energy from the sun. Solar thermal collectors are used in solar hot water systems (often found in homes) and photovoltaic collectors are used in solar electric systems

Solar Heating
Technologies or systems that take advantage of the heat energy coming from the sun. Solar thermal collectors are used in solar hot water systems (often found in homes) and photovoltaic collectors are used in solar electric systems.

Solar Mole or Solar Panel
A collection of solar cells interconnected to form a solar panel or mole.

Stabilized Energy Conversion Efficiency
the long-term ratio of electrical output to light input.

Systems; Balance of Systems
"Solar electric systems include the photovoltaic array and the other components that allow these solar panels to be used in homes and commercial facilities where a regulated DC power supply or an AC power supply is required. Components used in solar electric systems include; wire and disconnect devices, charge regulators, inverters, metering, and grounding components."

Thin-Film
a very thin layer of material formed on a substrate.

Volts
The unit of electromotive force that will force a current of one amp through a resistor or one ohm.

Voltage
The measurement of the force of electricity.

Voltage Meter
A device that measures voltage.

Watts
A measure of electrical power that is determined by multiplying the voltage by the amperage.

希望有帮到你，
如果还有什么疑问可以网络我

『贰』 急需一份英文翻译文章

本人是学电力系统的，只能帮你提供电气工程方面的文章。

电气安全概述
一、Electrical safety task :
1) to study various electrical accident and the mechanism of reasons, the patterns and characteristics and protective measures. (2) to study the use of electrical methods, electrical monitoring, Electrical inspection and electrical control methods to evaluate the safety of the electricity system and electricity proction solve the security problems.
二、Electrical Safety Work content ：
1) Study and to take effective security measures.
(2) research and the dissemination of advanced electrical safety technology to improve electrical safety standards.
(3) Develop and implement technical standards for security and safety technology point of order.
(4) Establish and implement a safety management system.
(5) in the thinking of electrical safety and electrical safety ecation.
(6) analyze the case, find out the cause of the accident and the law.
三、Guarantee the security of electricity fundamentals :
(1) Electrical Insulation. Maintain distribution lines and electrical equipment in good insulation, is to guarantee personal safety of electrical equipment and the normal operation of the most basic elements. Electrical Insulation whether the performance of good, by measuring the insulation resistance, crushing strength, Leakage Current and dielectric loss, and other parameters measured.

(2) a safe distance. Electrical safety distance is the body charged objects close to the body, such as dangerous without the safety and reliability of distance. If body charged with the ground between the body charged with charged between, and the human body charged between body charged with other facilities and equipment between shall maintain a certain distance. Usually, the distribution lines and changes and distribution installations near work, it should consider a safe distance from the line that changed, Distribution Equipment safe distance, a safe distance from the maintenance and safe operation of distance.
3) safety carrying capacity. Conctor set the security flow is allowed to persist through the internal conctor CURRENT. Conctor sustained through the current security set excess flow, heat conctors will exceed the allowable values, damage to the insulation, even lead to leakage and fire. Therefore, in accordance with the security conctor containing a conctor cross section to determine flow and the selection of equipment is very important.
(4) signs. Clearly, accurate, uniform signs is to ensure that electricity security of the important factors. Generally, a color logo signs, badges and signs model markings, and so on. A different color marker nature of the different uses wire; General badges as a sign of dangerous places signs; Model equipment as a sign of special signs.
四、Security technology of electrical equipment basic requirements。 electrical accident statistics show that the electrical equipment as structural defects, installation of poor quality and can not meet the safety requirements caused by the large proportion of accidents. Therefore, in order to ensure personal safety and equipment safety, technical aspects of electrical equipment have the following requirements :
1) exposed on the ground and the personal touch easier Charged equipment, should take protective measures reliable.
(2) charged equipment and the ground and some other parts should be charged to maintain a safe distance.
(3) easy to over-voltage power system, there should be a lightning lightning line arrester, Protection gap voltage protection, and other devices.
(4) low voltage power system should be grounded, zero protection device.
(5) to all high voltage electrical equipment to be taken to install high voltage circuit breakers and fuses different types of protection measures; Low-voltage electrical equipment to be used with correspondingly low electrical protection measures for the protection.
(6) in electrical equipment, the siting of safety signs should be located.
(7) According to some electrical equipment characteristics and requirements, should take special security measures. 5, electrical accidents basic reasons for the classification and the classification by electrical accident occurred in the form of disaster can be divided into personal accident, equipment accident, the electrical fire and explosion accidents

By accident when the circuit conditions can be divided into short-circuit accidents, break accident, grounding accidents, leakage accident; according to the seriousness of the incident can be divided into serious accidents, serious accidents, incidents general; by the extent of injury. can be divided into death, serious injury, three minor injuries.

由于本人学士不够,只能帮你这点小忙了。

一、电气安全工作的任务：
（1） 研究各种电气事故及其发生的机理、原因、规律、特点和防护措施。
（2） 研究运用电气方法，即电气监测、电气检查和电气控制等方法来评价电力系统的安全性和解决生产中用电的安全问题。
二、 电气安全工作的内容
（1） 研究并采取各种有效的安全技术措施。
（2） 研究并推广先进的电气安全技术，提高电气安全水平。 （3） 制定并贯彻安全技术标准和安全技术规程。
（4） 建立并执行各种安全管理制度。
（5） 开展有关电气安全思想和电气安全知识的教育工作。 （6） 分析事故实例，从中找出事故原因和规律。
三、 保证用电安全的基础要素
（1） 电气绝缘。保持配电线路和电气设备的绝缘良好，是保证人身安全和电气设备正常运行的最基本要素。电气绝缘的性能是否良好，可通过测量其绝缘电阻、耐压强度、泄漏电流和介质损耗等参数来衡量。
（2） 安全距离。电气安全距离，是指人体、物体等接近带电体而不发生危险的安全可靠距离。如带电体与地面之间、带电体与带电体之间、带电体与人体之间、带电体与其他设施和设备之间，均应保持一定距离。通常，在配电线路和变、配电装置附近工作时，应考虑线路安全距离，变、配电装置安全距离，检修安全距离和操作安全距离等。
（3） 安全载流量。导体的安全载流量，是指允许持续通过导体内部的电流量。持续通过导体的电流如果超过安全载流量，导体的发热将超过允许值，导致绝缘损坏，甚至引起漏电和发生火灾。因此，根据导体的安全载流量确定导体截面和选择设备是十分重要的。 （4） 标志。明显、准确、统一的标志是保证用电安全的重要因素。标志一般有颜色标志、标示牌标志和型号标志等。颜色标示表示不同性质、不同用途的导线；标示牌标志一般作为危险场所的标志；型号标志作为设备特殊结构的标志。
四、 安全技术方面对电气设备基本要求

电气事故统计资料表明，由于电气设备的结构有缺陷，安装质量不佳，不能满足安全要求而造成的事故所占比例很大。因此，为了确保人身和设备安全，在安全技术方面对电气设备有以下要求： （1） 对裸露于地面和人身容易触及的带电设备，应采取可靠的防护措施。
（2） 设备的带电部分与地面及其他带电部分应保持一定的安全距离。
（3） 易产生过电压的电力系统，应有避雷针、避雷线、避雷器、保护间隙等过程电压保护装置。
（4） 低压电力系统应有接地、接零保护装置。
（5） 对各种高压用电设备应采取装设高压熔断器和断路器等不同类型的保护措施；对低压用电设备应采用相应的低电器保护措施进行保护。
（6） 在电气设备的安装地点应设安全标志。
（7） 根据某些电气设备的特性和要求，应采取特殊的安全措施。
五、 电气事故的分类及基本原因的分类 电气事故按发生灾害的形式，可以分为人身事故、设备事故、电气火灾和爆炸事故等；按发生事故时的电路状况，可以分为短路事故、断线事故、接地事故、漏电事故等；按事故的严重性，可以分为特大性事故、重大事故、一般事故等；按伤害的程度，可以分为死亡、重伤、轻伤三种。

『叁』 变频器的专业英文翻译是什么

变频器的英文：frequency changer

frequency 读法 英['friːkw(ə)nsɪ]美['frikwənsi]

n. 频率；频繁

短语：

1、frequency response频率响应；录放幅频响应

2、frequency converter变频器

3、frequency band频带；频段

4、video frequency视频率

5、frequency control频率控制

(3)碳堆调压器英语怎么说及英文翻译扩展阅读

frequency的相关词语：frequent

词义辨析：

frequent, ceaseless这两个词的共同意思是“连续的”“经常的”“频繁的”。其区别是：

1、frequent指事物的重复出现,中间可有中断或停止; ceaseless指事物的发展变化过程中没有中断和停止。例如:

All things in the universe are in ceaseless development and change.

宇宙间的事物都在不断地发展和变化。

2、frequent通常用于书面语和较正式的场合; ceaseless常用于口语中。

词汇搭配：

1、frequent caller 常客

2、frequent changes 经常变换

3、frequent feature 常见的特征

4、frequent visitor 常客

5、less frequent 不是很频繁